Jump to content

Recommended Posts

Posted
4 minutes ago, Nucejoe said:

Hi, welcome.

Caliber?  Your experience working on watches?  tools you got?  Runs or not? What do you think is wrong with it? 

Regards joe.

Hey Joe thanks for replying,I am a noob at watch repairing but I always wanted to get more into it but lacked supervision,I am facing problems with my watch because I guess it's been years I serviced it and the problem is that even if I wind it it does not work.I hope you provide me with some knowledge and technical details about it.thank you.

Posted

So I guess first a picture, preferably of the movement. Try zooming the caliber .Dose seconds hand move forward when you shake or kinda back and forth a little. Neither?

A slip of screwdriver is all the requirement to ruin a movement. So ...

Nevertheless, I,ll stand by you till last drop of blood.

Regards joe

 

Posted
14 hours ago, Nucejoe said:

So I guess first a picture, preferably of the movement. Try zooming the caliber .Dose seconds hand move forward when you shake or kinda back and forth a little. Neither?

A slip of screwdriver is all the requirement to ruin a movement. So ...

Nevertheless, I,ll stand by you till last drop of blood.

Regards joe

 

Yes,the seconds hand goes back and forth a little and stops,I guess we need to talk one to one...for that can you share your Instagram I'd or I will share mine so that i can neatly explain and understand.

Regards, Abhishek

Posted

The seconds hand going back and forth indicates the very likelihood of staff pivots not broken. Chances are good a regulare servce is all thats required. 

Your thread is to be available to members to take part in, this will also prevent me help you destroy your watch.

A moderator can, if your request is not in violation of forums policies provide you with my contact info, which is fine with me, or issue us some sort of permission.

Regards joe

Posted
On 10/25/2018 at 9:09 PM, Nucejoe said:

So I guess first a picture, preferably of the movement. Try zooming the caliber .Dose seconds hand move forward when you shake or kinda back and forth a little. Neither?

A slip of screwdriver is all the requirement to ruin a movement. So ...

Nevertheless, I,ll stand by you till last drop of blood.

Regards joe

 

Thanks for the support....but I am a noob and I don't understand the actual names of parts....I think it is fine with the admin for us to talk on Instagram...please message me on Instagram @abhishek.18_

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Did you just swear at me matey?? I’m sorry, I’m not divulging personal information but there’s always personal reasons. There’s not much more than I can do other than plod along as best I can. However, my health is good now and I’m regularly getting plenty of exercise to keep it that way 👍
    • Same question that was asked last time Hakan, and emphasis was placed on it. It was ignored. The thread should still be there, if not I have a copy of his reply. 
    • This is probably the single most important point. One of my best friends, 48 years old at the time, suffered a massive stroke about 15 years ago. He barely survived, but his life was never the same after that. If you had asked me back then to guess which of my friends might have a stroke and nearly die, he would have been the very last one I'd have picked. He was perfectly healthy, played tennis three times a week, ran a successful business, was full of life, and had a wonderful wife and well-behaved teenage kids. The harsh truth is, we never know when it’s "game over." @Mark, I truly wish you a long, happy, and successful life. But have you given any thought to some kind of backup plan for WRT in case the worst should happen? Is there anyone who could keep the site going? If you can reassure us in some way, it would mean more than a lot to us!
    • Looks like glass with that bevel edge.
    • Update: The demagnetization only helped temporarily, maybe it pulled the wheels into a position where they liked each other. I have to adjust the sub second hand as it is a bit angled upwards and catching the minute hand stopping the whole movement but before this happened there were some wild deviations. HWGIKE#58 Alarm clock, cooked in hot cleaning fluid and oiled gently. This is a movement so I count it. 🙂 A while ago it tried to fly away one day, it was on my windows sill, we had strong wind the curtain flew like a flag and doing so encouraged my clock to do the same...  went out and ended up on the roof above the entrance door, its door in pieces but the clock itself suffered no damage otherwise. The original glass was already broken when I received it I still have the bottom part in two pieces. The new "glass" is acrylic. It also had a paper in the back in the case inside but it disintegrated, I still have a little bit of  piece of that too.     HWGIKE#59 Durowe 870 / Times M84 This particular instance is a D870, when I saw its worn out contact pin I thought that it must be a design flaw, and here we go: https://17jewels.info/movements/d/durowe/durowe-870/ An incredible movement again where the balance wheel drives the train and has two magnets one for the balance wheel/coil and one for the pallet. The magnet for the pallet is basically the "draw" one direction. The coil is about 1.8kOhm and one end is in contact with the main plate and the other end is soldered to a contact pin which is insulated by the means of putting it into a jewel and this contact pin is rubbing against a wire getting the energy/impulse as it is passing. Behind the contact pin there is an "impulse jewel" not sure why is it there... the wire seems to hit the impulse jewel first then the contact pin but maybe it is there only for insulation purposes? I was almost certain that the screw holding down the battery - (minus) clamp had no insulation washer.. i only noticed the green stuff around it coming from battery leakage... anyway the + and - had a shortcut which took me a while to realize.. had to fabricate one insulating washer on my own. The jewel settings were dirty but not it is all cleaned and oiled. The contact pin might work for a while but I am sure it has a short life. It is a front loader the whole thing is held together by the case so it is not possible to regulate it without putting it all together and taking the movement out of the case again, very inconvenient. A wonderful movement but not made for eternity only for the consumer market.  
×
×
  • Create New...