Jump to content

Recommended Posts

Posted (edited)

I own a Seiko watch which is quite a number of years old and my grandson, aged 5 took it out without me knowing and has smached the crystal on the watch.  How do I go about sizing it, and where should I look for the Crystal?

 

On a second question, I would like to replace an automatic movement from a VOKEN watch,  that has a lot of damaged, with a new movement, the watch has a day/date and has these numbers on the back plate;  V6 8W     4V-00009 ..  How do I go about sizing this up and making sure that it will fit with the day date the right way round, Also where could I order one from.

 

I know that you gentlemen have a lot of experiance between you, and I hope you can help this amature out of this situation.

 

Thank you all very much.

 

David.

Edited by DMS
Posted

There's a lot of confusion about Voken - some say it's a Russian make, others a Japanese - and others a Japanese movement in a Russian-made watch...

 

My guess is that it's a Japanese movement, but it's fairly obscure stuff from the '70s or '80s...

  • Like 1
Posted

Hi David,

 

About the Seiko, there is a number on the case should look like 7S26- XXXX. the first for letters/numbers are the movement caliper and the last 4 numbers/letters (represented by X) is the case type. With those numbers you can order the right crystal. Here in US I either go to Esslinger or to ofrei....

 

The other watch I'm not familiar with. In any case, if you could post pictures of both it would be very helpful.

 

Bob

Posted

A word of caution repairing a Seiko 7005 recently found that a wrong crystal had been fitted. You need a domed crystal not flat one (this one cost me many hours of bother)

  • 2 weeks later...
Posted

For the Seiko watch the numbers on the back read; 7123 - 8540-P G,  The crystal that's on there at the moment is flat and not domed so should I order a flat one or domed one as WRT Addict suggests?

 

Thank you.

 

David.

Posted

Best to install an original if you can get one.

 

This case number shows up on Cousins and the glass is available.

 

Just pop S15430 into the search on Cousins and this should be the correct glass.

  • Like 1
  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Alex mentions the coils below the stud should remain the same as you move the regulator block along the terminal curve.  Mine do that. What he doesn’t discuss and is used in the other video is how the regulator block is used to adjust rate and positional error.  He also doesn’t mention how opening and closing the pins could and in my case does, alter amplitude  In Alex’s video once he sets the stud he never adjusts the regulator pins yet every new movement I get have the pins signing closed. 
    • The video I linked above does mention the spacing of the hairspring coils, and the importance of the regulator being able to move through its full range without distorting the hairspring - the terminal curve of the hairspring must be concentric with the regulator pins throughout the regulator’s range.  If you meticulously follow every step in this video, the regulator system should behave as intended, regardless of the brand of the movement.  Best Regards, Mark
    • Hi friends! My mother got a bunch of old watches from a horologist who was retiring, and he subsequently passed away. It's been in her studio for years, and she showed it to me today and I just fell in love with it. Sadly, I don't know a darn thing about it yet. It's quite old, or at least seems to be. It has two winding arbors, but the key is missing. The crystal appears to be some kind of yellowed plastic, which is odd- I think it was replaced at some point to possibly protect it or something. If I had to guess, it's from the mid-19th century, given that it has no keyless works and that it says "Anchor Escapement" in French. It looks to be about 18 ligne, and the case fob is positioned in the upper right corner. The face is missing the dial, the hands, and a couple of the wheels that drive the hands- I think. But the movement itself seems to be in excellent shape. The serial number on the movement matches the number on the case- it's stamped on the movement and on the case in two places. I haven't started any disassembly yet, but I'm wondering if anyone can give me some idea of what kind of movement it is, and where I might look to see what parts are missing from the face. i may even have a dial that would fit it. It's in good enough shape that I think I could get it running, assuming I could find the missing parts. Any insights are vastly appreciated and thank you! Addendum: The inside of the case has some *very* tiny scratched numbers and letters in it, but I am having an extremely hard time seeing what they are. Like "N 99" and "No192X", They were clearly done with some kind of sharp stylus and maybe they mean when it was serviced or by who? Addendum the second: At least one of the scratches seems to say "N1921X" or maybe "W1921X". Serviced in 1921? And the inside lid of the case has the letters R H with a star between them, and a very tiny mark that says "ARGENT" in a u-shape.
    • I’ve watched every video I can find on YouTube. Some of the info is contradictory and none mention  the effect on amplitude or spring coil spacing which I observed. I was hoping someone here is a Seiko expert and knows these inside out.   
    • This video explains how to set up and adjust the etachron regulator :   I hope that helps, Mark
×
×
  • Create New...