Jump to content

seiko casing parts guide

watchweasol
 Share

Recommended Posts

watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi  attached is a lot of files apertaining to the seiko casing guide information.

03. Casing Guide seiko.pdf Seiko Casing Parts List (1977) IV. Cal. 3302 to 5245-6010.pdf Seiko Casing Parts List (1977) V. Cal. 5245-7000 to 5740-8010.pdf Seiko Casing Parts List (1977) VI. Cal. 6100-8000 to 6245-9001.pdf Seiko Casing Parts List (1977) VII. Cal. 6306-5000 to 8346-9020.pdf Seiko Casing Parts List (1977) I. Notes & Index.pdf Seiko Casing Parts List (1977) II. Watches Japan Market Only (1).pdf Seiko Casing Parts List (1977) III. Cal. 0702-0723.pdf

  • Like 2
  • Thanks 5
  • 2 years later...
clockboy Distinguished Member

clockboy

Posted
Posted

It’s always worth putting up a picture. Some are removed from the front some from the back some have a complication of a split stem but I don’t  think Seiko use that method. 

  • 7 months later...
mikepilk Distinguished Member

mikepilk

Posted
Posted

Has anyone found any parts listings for more modern Seiko cases ?

You can do a search using the case number on Cousins website, and it will list the case parts they have, but  it would be useful to find casing guides like those above

JohnR725 Distinguished Member

JohnR725

Posted
Posted
23 hours ago, mikepilk said:

Has anyone found any parts listings for more modern Seiko cases ?

I don't think the existing physical form anymore they're all electronic. In other words the parts reference books printed up above right a time when the Internet didn't exist. So that meant physical books but now it would be PDFs but typically it's online. But only online to those that have access sort of.

Like this source normally I use it to look up part numbers but notice the description of the very top of the page you can actually enter in case numbers. But in the case of Seiko there's the problem of their parts are worldwide available in other words of something was eight US market or Japanese market each market typically won't have the parts for the other market.

http://cgi.julesborel.com/

And this is another website can find Seiko stuff

https://boley.de/en/shop/1.watch-spare-parts

 

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Mark
      Ad Free WRT

      By Mark · Posted

      Of course it will continue Richard.
    • Rixy
      Help with Hermle ships clock

      By Rixy · Posted

      I have stripped and cleaned a Hermle ships clock. It was just oily, no major faults, and I reassembled it, following my photos in reverse order. The time train is fine but the strike train will not play the ships bell strike for half-past. Ships bells play a four hour sequence for the 'watches' and play double 'ding' for the hour and the double dings plus one for the half past (eg half past the second hour is 'ding-ding' 'ding-ding' 'ding'). Sounds complicated but it isn't really. The strike wheel consists of pairs of bumps (for the ding-ding) and no single bumps. There must me some mechanism on the half-past that lifts the strike lever over one of the bumps so only one ding is played. When I get to a half past, it still plays double ding. I have a feeling it is to do with the lever in front of the rack (there is a sprung attachment  on it) and the position of the wheel (to the right) with the two pins that lets that lever fall, but no matter where I place that wheel I cannot get a single ding at half past! Please can someone help with advice on positioning so I can fix this? BTW Happy Easter 🐣 
    • mbwatch
      Who's doing what in the world of watches today.

      By mbwatch · Posted

      No it's not 52. I had looked at the Pocket Watch lift angles thread, which lists Elgin 6s as something really high like 62° but visually that is not at all what this watch is doing. I think 42° is more correct and that's where my machine is setup. The watch has a million problems but I have made solid progress. Impulse jewel replaced. Hairspring didn't match the balance (which also doesn't match the serial) but I got it down into range this weekend with 8 or 10 huge timing washers. Replaced the mainspring, balance and train are nice and free. At this point it is running consistently and in beat at about 160°, the third wheel has a bend that sends the timegrapher on a little roller coaster every 8 minutes or so. Remaining amplitude problems may be down to the escapement. The banking pins were way out and it didn't run at all before I started. It has one of the old brass escape wheels rather than steel, and I assume the faces its teeth are probably worn or scored in a way I can't yet fix (or see without a microscope). I know this watch is not going to run above 250° but I am going to keep trying to get above 200. But the best part about this watch? Some unscrupulous person stamped "21 JEWELS" on the train bridge sometime in the past, right on top of the Damascening. It's a 15 jewel movement.
    • tomh207
      Smiths rim wind and set

      By tomh207 · Posted

      I think it would rather be the blast of high current drain that would do the damage. But if used occasionally to maybe fix a mainspring or do dial feet it might be worth trying especially if the mainspring or a replacement couldn’t be found.    Tom
    • RichardHarris123
      Ad Free WRT

      By RichardHarris123 · Posted

      This is indeed a unique site and members including myself genuinely care about it.  All we want is the site to continue. 
×
×
  • Create New...