Heritor watch movement removal from case

[Rishah]

Thanks in advance. 

I have a heritor watch for which one of the hands has come loose and I need to remove the movement to fix that. Issue is I don't know how to remove this particular movement. I have tried everything I can think of including moving two of the screws in corner to horizontal position but still it won't come out. Any suggestions 

[Poljot]

31 minutes ago, Rishah said:

Thanks in advance. 

I have a heritor watch for which one of the hands has come loose and I need to remove the movement to fix that. Issue is I don't know how to remove this particular movement. I have tried everything I can think of including moving two of the screws in corner to horizontal position but still it won't come out. Any suggestions

Perhaps you will need to remove the crystal first and then pull the movement from top?

It's not clear if you already removed the winding stem.

Edited December 9, 2020 by Poljot

[Rishah]

Hi @Poljot

I have already removed the winding stem 

[Poljot]

6 minutes ago, Rishah said:

Hi @Poljot

I have already removed the winding stem 

Right, then you may need this tool:

https://www.amazon.ca/Watch-Crystal-Remover-Inserter-Tool/dp/B000OVHU44

 

[Rishah]

 @Poljotokay will try using that 

[Poljot]

Just now, Rishah said:

 @Poljotokay will try using that 

Please upload one photo showing the crystal on your watch. If not me then someone else will help you.

[Rishah]

Here are some pics from side and front of the crystal 

[Graziano]

Looks to me it may have a pressed in movement ring ,holder if not maybe front loader . Not a bad looking timepiece either.

[Poljot]

1 hour ago, Rishah said:

Here are some pics from side and front of the crystal

Isn't it a notch? In this case you may need something like Bergeon 4932, or SWISS army knife ?

[Rishah]

@Poljot Yes it worked, I was able to take out the bezel and crystal attached with it . After that it was super easy. Thanks a lot for advice, really appreciate it 

[Poljot]

7 hours ago, Rishah said:

@Poljot Yes it worked, I was able to take out the bezel and crystal attached with it . After that it was super easy. Thanks a lot for advice, really appreciate it 

No problem. I'm glad it worked.