Jump to content

Site not displaying properly


Recommended Posts

Yes, there is an abundance of info, only problem is I don’t have admin rights to a lot of things on the system so my hands are tied, it just seems strange to me that one day it works the next it doesn’t, and the fact that I use other watch/clock forums aswell and none of them are displaying as this one does.

Link to comment
Share on other sites

  • 3 weeks later...

Right gents this is still a problem, I’ve tried everything, and I can only put it down to the way this forum is being coded to different OS across platforms, and to different search engines, I can only run google chrome on windows 7 on my laptop ( works laptop ) on my old home laptop running XP and internet explorer and the wife’s works laptop running windows 10 and internet explorer and google chrome etc. 
so I’ll have to wait until I get a new works laptop to be able to view the forum on a big screen whilst at work etc 

Link to comment
Share on other sites

  • 2 weeks later...
On 4/5/2021 at 5:53 AM, jdm said:

That is technically impossible. WRT (just like any other serious website of the world)  uses HTTPS with which all the content exchanged, including which page is being accessed, is encrypted end to end.

It is quite possible.  While https is encrypted end-to-end, one of those ends is the laptop in question.  To which the IT department can do just about anything they want.  It's very possible for a browser extension to block certain websites but not others, or filter certain kinds of content.  While the data is encrypted as it is transported over the Internet, it must be decrypted to be used, and that is the point where things like anti-virus software, porn filters, advertisement injection trojans, and keep-employees-from-browsing-on-the-clock software jumps in to do its thing.

It is also possible to intercept https traffic in the middle by an impostor acting as the other party (i.e. watchrepairtalk), observing the data, and the forwarding it on to the real site.  What is supposed to happen, is that the website's cert is supposed to prevent impostors.  Maybe you've gotten the scary looking warning page about this site's cert is invalid and maybe not who you think it is, etc. etc.?  It's almost always because the site forgot to renew their cert and has let it expire.

So it's not supposed to be possible, but the IT department can configure your computer to make it possible.  Configure a proxy that does this.  Add an authority to the browser's trust store that is used to get it to accept fraudulent certs.  In some countries this is standard practice.  https does not thwart the great firewall of China.

Link to comment
Share on other sites

1 hour ago, xyzzy said:

It is quite possible.  While https is encrypted end-to-end, one of those ends is the laptop in question.  To which the IT department can do just about anything they want. 

Technically that is correct, at the same time it doesn't make much sense for an IT dep.t to go to such lengths when they can simply block an entire website that they don't want you to see.

Quote

Maybe you've gotten the scary looking warning page about this site's cert is invalid and maybe not who you think it is, etc. etc.?  It's almost always because the site forgot to renew their cert and has let it expire.

Fortunately WRT security certificate has not expired, neither has in the past. Furthermore, our Host Mark has chosen a platform with some extra features above the standard minumum requirements:

  • ECC (elliptical curve cryptography) TLS  certificate 
  • QUIC transport, while not specifically a security feature, it provides a faster data delivery.
  • AES 128 GCM (Galois Counter Mode)

While these terms are Arabic to the uninitiated, they simply means that  just accessing and posting on this site is secure and private - even if there isn't anything to hide!

Link to comment
Share on other sites

5 hours ago, jdm said:

Technically that is correct, at the same time it doesn't make much sense for an IT dep.t to go to such lengths when they can simply block an entire website that they don't want you to see.

Unlikely that they are blocking this site specifically.  More likely it is caught by something meant for another purpose as a side effect.  Consider if one takes the phrase, "The pen is mightier," removes the spaces, and then looks for other words that might now appear and why this might get blocked.

The incorrect display looks somewhat like the css style sheet did not load but the rest of the site did.

5 hours ago, jdm said:

Fortunately WRT security certificate has not expired, neither has in the past. 

That was given as an example of the system used to prevent imposters from eavesdropping and manipulating supposedly secure https connections working as intended.  The IT department that controls the laptop can easily circumvent this.

Link to comment
Share on other sites

  • 7 months later...

Well gents I’ll give you an update on my predicament. I now have a new works laptop running windows 10, and guess what……. I still can’t get this site to display correctly, it’s so bad it’s unworkable.

ive tried google chrome, Microsoft edge, and explorer and it will not display on any of these.

So I can only guess that there is a problem with either the script or because of the amount of adverts now in the site the high security I have on my laptop will not allow the site to display.

Every other site from NAWCC to RWG display fine. 
So I’ve given up!!!!

Link to comment
Share on other sites

42 minutes ago, transporter said:

 because of the amount of adverts

At this time one can use an ad blocker on WRT.

 

42 minutes ago, transporter said:

now in the site the high security I have on my laptop will not allow the site to display.

I don't know what kind of  "high security" is that, but if it's impeding WRT to display then isn't doing its job correctly, because WRT is secure and passes verification:

Cattura.PNG.8b139f9c94cb52c49ed2df768f03ab2f.PNG

Link to comment
Share on other sites

  • 10 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • HWGIKE#57 Valex FEF 190 15 jewels Swiss lever full service and repair This one was waiting for a balance staff replacement in my cabinet parts and case cleaned up with a new balance staff and a 4th wheel as the original 4th wheel had a broken pivot for the off center second hand. I never attempted a balance staff replacement before however I received a Bergeon Molfres (i was hunting it for about 2 years) and with the help of it I managed to remove the old staff and riveted the new one in. It also received a new MS, crystal and the hole for the MS arbor was also tightened. With the new MS now it has an acceptable performance meaning that the amplitude goes up to 280 fully wound, has an acceptable beat error and I have the two nice lines but only dial up, dial down is not as nice and I could not figure out as why. I have the two lines but the amplitude is dropping to around 230 and the lines are a bit hairy. Both dial up and dial down the lines just go up and down without seemingly any pattern. I cleaned the movement two times, and then a 3rd time pegged out the main plate and train bridge holes but made no change. Both the HS collet and the roller table was too lose on the new staff... I did not count how many times I took the balance cock off to sort out the HS collet, the roller table and the beat error, somebody before me also shortened the HS by pushing it out a bit and it seems every time somebody is messing with the end of the HS the protruding bit is most of the time twisted bent etc. This one was probably one of the most challenging repair and service. I might take the new MS out and clean it lubricate it as I just pushed the new one in to the barrel from the retaining ring. Plus started to re-read the theory of the escapement and how to analyse the graph on the timing machine: Greiner Chronografic Record manual. I am also thinking to put the watch on a 24 hour long run with the eTimer SW it once helped me to figure out what was wrong with a watch. There is an interesting part of the Greiner record manual talking about the pallets and the end shake of the balance and pallet staff. Maybe this is my issue? Who could that possibly identify? After a few years now I am still without a clue how could watchmakers make parts I can only see with my microscope or how could/can they carry out complicated services impossible to do.. real magic..... .... ..... before I sent this post while the pics were uploading I had an idea, i was browsing the possible outcomes on the timing machine I had one for magnetism..... so I demagnetized the movement and it is not hairy now.... two really nice lines 0.2 ms beat error still a bit wavy, but a lot lot better..... argh....  
    • Hi there, welcome here.  
    • yes the advertising revenue should generate money. The question is how much money? Then as far as the cost of the website goes that's relatively easy to determine? all you would have to do to grasp costs and profitability would be to go to the link below and you can actually get a website for free try it out for free I believe you get no advertising initially. They also talk about that they'll help you out they have marketing tools and some sort of paid subscription or something. So I guess were shopping for a whatever just ask them what would a maybe could use this one as an example in other words it's going to look basically identical to this is going to have advertising a paid subscriptions what's it going to cost? After all they want to sell or give us a message board like this they should bill answer the questions as they're the people who did the software for this. Yes they really said you can have a free discussion group at least to start. https://invisioncommunity.com/ I was curious about the monthly supporter thing where exactly do we find that on this message board? A quick search I'm not finding it so obviously I'm not looking in the right place?
    • Help me out here, but with all the advertising on this site (which I don't mind) wouldn't it pay for itself or even make money for the owner ???
    • Wie ging die Sache weiter?   please use English for your posts    Tom
×
×
  • Create New...