Jump to content

The Case of the Battered Rolex

Deomandinka
 Share

Recommended Posts

watchweasol Distinguished Member

watchweasol

Posted
Posted

Nice job,    I had a Tissot ,which was found in the road after bring run over several times A bit of work and its a working watch,       nobody dismantled it s it was intact but battered so all the parts were there.    

Deomandinka Member

Deomandinka

Posted
  • Author
Posted
2 hours ago, watchweasol said:

Nice job,    I had a Tissot ,which was found in the road after bring run over several times A bit of work and its a working watch,       nobody dismantled it s it was intact but battered so all the parts were there.    

Nice find, which Tissot was it ?
The Rolex wasn't dismantled (Apart from the strap), that was all that was left of it after the crash. My customers father died on the motorbike while wearing it. He wanted it to be restored for obvious reasons.
If anyone knows of a strap for one of these, I know he is on the lookout.
I must admit I was surprised that Rolex wouldn't touch it. This is the 4th one I have had that Rolex wouldn't touch. I have also just had a Tag with a similar story. Very Odd

Deomandinka Member

Deomandinka

Posted
  • Author
Posted
17 hours ago, watchweasol said:

Probably related to age and condition, and estimated repair /overhaul time scales.

I know what you mean but the guy told Rolex that money was no object, so ....?????

watchweasol Distinguished Member

watchweasol

Posted
Posted

I guess that it was without their remit and the guys that decide policy are driven by profit.  Its a shame that they think that way  profit and street cred, watches worth 10,000 upwards, the higher the price the higher the priority.

KarlvonKoln Distinguished Member

KarlvonKoln

Posted
Posted

Must be Rolex week.  I am starting work on a vintage Oyster Perpetual Date.  This thing wears the scuffs and scars of long years of daily use. The customer wanted the case polished up a bit.  Man, Rolex uses some hard, hard stainless steel for their cases.  Made me wonder how the owner was able to leave all these marks on it.

Before me, he'd taken it to a Rolex certified tech, for standard service and case polish.  And they refused, presumably because the cost of service would exceed the perceived monetary value of the watch.  But my customer just wanted his watch serviced and looking nice, and could afford not to quibble about price.  He's old; he's the original owner from day one; he likes this watch.  And if they wouldn't work on it, he'd find someone who would. 

So now I have to get a Rolex case opener (because I have not yet worked on a Rolex; I've mostly been more of a "common man's watch repairman").  The other weird thing is that he also complains that it loses 5 min. per day.  I've been observing it for 3 days now, while finishing other bench work, different positions, even wearing it from time to time, and I've seen no evidence of loss.  It's still keeping up with my "atomic" clock as I type this.

20211023_111205.jpg

Plato WRT Addict

Plato

Posted
Posted
14 minutes ago, KarlvonKoln said:

Before me, he'd taken it to a Rolex certified tech, for standard service and case polish.  And they refused, presumably because the cost of service would exceed the perceived monetary value of the watch.

Very strange behaviour, surely the least they could do is give a quote. 

KarlvonKoln Distinguished Member

KarlvonKoln

Posted
Posted
5 hours ago, Plato said:

Very strange behaviour, surely the least they could do is give a quote. 

I thought so too.  I'm guessing there was more to this than what little I heard, but for whatever reason they gave him the brush-off.  So he wanted to see what I could do.

Deomandinka Member

Deomandinka

Posted
  • Author
Posted (edited)
16 hours ago, KarlvonKoln said:

Must be Rolex week.  I am starting work on a vintage Oyster Perpetual Date.  This thing wears the scuffs and scars of long years of daily use. The customer wanted the case polished up a bit.  Man, Rolex uses some hard, hard stainless steel for their cases.  Made me wonder how the owner was able to leave all these marks on it.

Before me, he'd taken it to a Rolex certified tech, for standard service and case polish.  And they refused, presumably because the cost of service would exceed the perceived monetary value of the watch.  But my customer just wanted his watch serviced and looking nice, and could afford not to quibble about price.  He's old; he's the original owner from day one; he likes this watch.  And if they wouldn't work on it, he'd find someone who would. 

So now I have to get a Rolex case opener (because I have not yet worked on a Rolex; I've mostly been more of a "common man's watch repairman").  The other weird thing is that he also complains that it loses 5 min. per day.  I've been observing it for 3 days now, while finishing other bench work, different positions, even wearing it from time to time, and I've seen no evidence of loss.  It's still keeping up with my "atomic" clock as I type this.

20211023_111205.jpg

The case openers are less than £20. Mine was a set of six with an adaptor. As soon as I bought it the Rolex's started appearing in my workshop. A very bazar coincidence. I think you have dodged a bullet if you don't have to regulate the timing. It's a bit of a pest as you change it by adjusting the weight screws on the balance wheel. Generally there is only one regulator pin and that is for changing the beet error.
This is quite a good article if you are interested:
https://www.minus4plus6.com/regulation.php
I noticed the steel is generally of a higher quality (I guess you must be paying for something rather than just the name haha), and a bit harder to polish. I always thought this was a good thing as it can give you a bit of an error margin as it's a lot harder to go too far. I generally use a Dremel with these or simular  https://www.ebay.co.uk/itm/223596786388?hash=item340f6832d4:g:1lsAAOSw94ddNXwt
Very good for fine removal of dings and scratches without loosing the sharp edges. Takes a while but the results are stunning.

Edited by Deomandinka
Extra info
  • Thanks 1
Plato WRT Addict

Plato

Posted
Posted
11 hours ago, KarlvonKoln said:

I thought so too.  I'm guessing there was more to this than what little I heard, but for whatever reason they gave him the brush-off.  So he wanted to see what I could do.

Their loss could be your gain, remember to take pictures and post us the results! 

  • Thanks 1
KarlvonKoln Distinguished Member

KarlvonKoln

Posted
Posted

Thanks for all the tips, gents!  I have to agree, with Rolexes the steel does seem harder than most, the edges sharper and more well-defined.  Some of the dings in this one seem a little deeper than I'd have expected, but I will use the information you all have posted and see what I can do for it.  Thanks again.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • transporter
      Smiths rim wind and set

      By transporter · Posted

      Ok, as per pictures I have a smiths rim set and wind on the bench, swimming in oil but all sorted. The fault I have is the mainspring bridle has lost its tab/notch/hook, like a hebdomas pocket watch the mainspring is fitted to a bridal in the barrel which slides around on full wind onto 4 notches in the barrel wall, thus stopping damage to the mainspring by over enthusiastic winding. So my questiion is this, what is the best way to create another hook in the bridal, my thoughts are along the same lines as making a new hole in the mainspring end, annealing etc, but what and how to make the hook?? I have a pair of barrel hook pliers that work great in soft brass but won’t even scratch the bridal, what I don’t want to do is whack a hole into it and not have a hook. the pictures are of the bridal ( broken) and a hebdomas ( complete ) incase you are wondering what I’m on about. And a few of the serivce. Thanks for any advise.
    • zx6rfool
      Replacing, upgrading Ronda 715 Harley?

      By zx6rfool · Posted

      Decided to give the case and bracelet a good cleaning and my first shot at polishing/brushing. Went with the Cape Cod polishing cloth and gray scotch brite method.  Before First; Then After; Then comparing to some original links from when the watch was new to now.       
    • praezis
      Unitas 6376

      By praezis · Posted

      What is this (left of the red line)? hairspring? Frank
    • nickelsilver
      Unitas 6376

      By nickelsilver · Posted

      It's either bent or hung up on something or both. The hexane won't hurt it, and hanging from a balance tack indefinitely won't hurt it.   If the spring is glued to the stud there's a chance that the glue was softened and the outer coil stuck to the stud. Haven't seen that happen, but I suppose it could. Don't know if hexane affects the glue used either.
    • tonydagee
      Unitas 6376

      By tonydagee · Posted

      Hello all. some help required here from the community please. I serviced this movement, which was running reasonably well, but the balance spring which was running healthily before I started, after cleaning in hexane for 30 secs, is all bunched up at the stud. I did store the balalance on a tack thereafter for a day.   could the spring be strained under gravity? I demagnetised of course, and the balance is squeaky clean. some help would be much appreciated. Thanks, Tony G    
×
×
  • Create New...