Jump to content

Another use for zip ties!!

LittleWatchShop

By LittleWatchShop
in All Things Clocks

 Share

Recommended Posts

nickelsilver Distinguished Member

nickelsilver

Posted
Posted
54 minutes ago, LittleWatchShop said:

Pulling spring into position so that it does not fight with the other wheels while assembling.

I can't be the first guy to think of this.

2022-03-04 12_11_20-20220304_120147.jpg ‎- Photos.png

I've done that. I have the clamps, but sometimes they just don't fit, ha ha.

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
17 minutes ago, nickelsilver said:

I've done that. I have the clamps, but sometimes they just don't fit, ha ha.

The clamps are there but still the wheel wants to push away from the pivot.  But, I like your idea of using zip ties for clamps!

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted (edited)
16 minutes ago, watchweasol said:

I find that using the ties is easier

So you use them for clamps/retainers then.  That is good to know.  They are much thinner thus avoiding obstructions.

Edited by LittleWatchShop
  • 3 months later...
transporter Super WRT Addict

transporter

Posted
Posted

Yes I use this idea, I still use the clamps to hold the springs but like you I found that the great wheel tilts and won’t align to the intermediate wheel. So using tiewraps to pull the great wheel over into position is a gift👍

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mbwatch
      Automatic vs Manual movement servicing

      By mbwatch · Posted

      If at all possible, find a service guide for the automatic movements your work on, because the lubrication procedures may have different requirements or rely on oils you would not use in a manual wind train (in addition to the braking grease you mentioned). Some autos like older Seikos do not have a manual wind option, so the procedure of letting down the mainspring without being able to use the crown may require a screwdriver in the ratchet wheel screw and great care. Do you have an auto movement you were planning to start with?
    • LittleWatchShop
      Breitling Navitimer 806

      By LittleWatchShop · Posted

      I am an amateur, so there's that. I do not get fixated on amplitude, lift angles, and beat error. However, 4.8ms would bug me if it were my watch. But you must judge your own skills to appreciate the possibility of going backward. I suggest, that you button it up let your friend enjoy the watch for now. As your skills progress, come back to it and correct it. I assume that this watch has a fixed hairspring pin. Some modern watches have an adjustable pin along with adjustable regulator. These are trivial to get in beat. I own a valjoux 726 my dad gave me on my 18th birthday (a looooong time ago). I broke the ratchet wheel with an aggressive wind 4 yrs ago. I have been waiting for my skills to progress before doing a service. I am close. Your advice is well placed and I will apply it.
    • tonydagee
      Unitas 6376

      By tonydagee · Posted

      I didn’t find any anomaly to the left of the red mark…reflection? this is the balance in its pivot in the inverted assembly. i can’t see any obvious kinks  and the spring is flat as far as I can see. Either the stud screw is missing, or it’s glued in… I don’t know. I’m loathe to fiddle with it. Any further insights? Thanks!
    • Bonefixer
      Breitling Navitimer 806

      By Bonefixer · Posted

      Update!  I've dismantled it, cleaned all the glue off, and rebuilt and lubricated the base movement. I'll leave the chrono part for another day. It's running well - great amplitude and keeping time, but it's got a beat error of 4.8ms.    How important is it to correct this? I'm worried that the potential for making things worse having to take the hairspring off and on repeatedly to adjust this. Would anyone here accept it at that?
    • Neverenoughwatches
      Discussing the forum in the event of no administration

      By Neverenoughwatches · Posted

      Since I've been banned from the previous discussion, apparently my language was inappropriate...for small boys. I will start another thread and act in a more decent manner for the girls and ladies of the group.  Please what will happen if the forum can't be managed by the administrator, are there provisions in place to preserve the achived member's questions and answers over the years. Please if I may ask these important questions that are important to the members please.
×
×
  • Create New...