Quality Chinese Tools

[mbwatch]

12 minutes ago, SwissSeiko said:

Hopefully your new one works well

FedEx says it is on my doorstep right now.

[spectre6000]

I had a 3d printer motherboard delivered direct from China a few days ago with no issues or delay as well. Was a warranty part, so I didn't have to deal with anything on the paperwork or payment side. Seems that bit of chaos was short lived. New/more tariffs coming from the kakistocracy soon, so get 'em while you can afford to...

[valleyguy]

Horia clone from ali, the quality as gone down hill since the first one i got a while back it was ok until i had a little mishap,  i ordered a second that was delivered this morning, the thimble as alot of play it can be wobbled from side to side it's also missing the reference line/mark.

My old one had a pin in the side while this newer version as a grub screw, i've been going through photos on ali's site from differnent seller to see if i can find a seller that as the pinned version, a lot of sellers only have photos showing one side so you can't tell which version it is, i don't know if i just got a duff one or are all of these with the lower grub screw sub standard.

I'm going to start the return process to ali, then order another from a different seller.

Edited March 18 by valleyguy

[mbwatch]

20 minutes ago, valleyguy said:

I'm going to start the return process to ali, then order another from a different selle

I have noticed some are sold at around 25% less and assumed lower build quality. Did you pay on the higher, lower, average side?

[HectorLooi]

56 minutes ago, valleyguy said:

Horia clone from ali, the quality as gone down hill since the first one i got a while back it was ok until i had a little mishap,  i ordered a second that was delivered this morning, the thimble as alot of play it can be wobbled from side to side it's also missing the reference line/mark.

My old one had a pin in the side while this newer version as a grub screw, i've been going through photos on ali's site from differnent seller to see if i can find a seller that as the pinned version, a lot of sellers only have photos showing one side so you can't tell which version it is, i don't know if i just got a duff one or are all of these with the lower grub screw sub standard.

I'm going to start the return process to ali, then order another from a different seller.

Kwong Yuen Watch Repair Tool Kit 6175A Cover Lever Bottom  Dismantle Watch Ring Press Glass  Band for Watchmaker
https://a.aliexpress.com/_mPpKpRp

Kwong Yuen is the Bergeon of China. They are known for high quality tools. But their prices are only slightly cheaper than Cousins. 

[valleyguy]

I went for the mid priced one, middle of the road, i also thought they'd be lower build quality on the bargain priced ones so best to avoid, the one i got was £76, the lower priced around £50 while the higher priced £85, these are UK prices so not sure what prices ali charge in other parts of the world.

[Neverenoughwatches]

I paid 130 inc. Shipping 3 years ago, good quality steel and the spindle is quiet accurate,  not perfect but very usable. If you have a lathe and experience, the quality of the stumps and pushers are not so much of a problem, easy to knock out spares.

[nico]

I'm thinking of buying a pressure / waterproof tester. This one is not expensive (excepted the shipping costs) and looks like a La Pavoni espresso machine 

Does someone use this kind of machine ?

[LittleWatchShop]

I have one

[mikepilk]

I have one and it works well.

[spectre6000]

Link?

[Jon]

I use one of these

https://www.cousinsuk.com/product/calypso-wet-tester?code=W1839

For the money, I'm really impressed!

[nico]

I ordered the cheap one shown in my earlier post,  I can do a review in a few weeks if there's interest.

Edited April 8 by nico

[RichardHarris123]

2 minutes ago, nico said:

I ordered the cheap one shown in my earlier post,  I can do a review in a few weeks if there's interest.

Please do.