Jump to content

Vintage Homemade Crystal Press.............refurbished.

Geo

By Geo
in Tools & Equipment

 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted

I purchased a cheap Chinese crystal press when I took up watch repairing/refurbishing a few years ago, this was one of the lever operated type with nylon dies. This has served me very well, but there are some jobs that a screw type of press is far better for because of the more sensitive control.

Being a canny Scot, I kept an eye on eBay for a second hand Robur or Horotec and stumbled across this antique home made press for £14 delivered.

post-124-0-00007400-1435348982_thumb.jpg

The engineer in me immediately saw the potential, all it needed was stripped down, modified to take new dies and repainted.

The other thing that was required was a set of new aluminium dies, so after a search on AliExpress I purchased these for £26 delivered from China.

post-124-0-76073200-1435349243_thumb.jpg

Right, down to business.

(1) Modify the lower die holder to accept the 6mm threaded alloy dies.

post-124-0-94920900-1435349432_thumb.jpg

(2) Make an adaptor to fit the bottom of the ram with a 6mm thread to take the dies.

(3) Machine the lower end of the pillar to give clearance for the largest die.

post-124-0-36916600-1435349599_thumb.jpg

(4) Accurise the dies to ensure that the faces are parallel. Many were slightly out of truth.

post-124-0-32890100-1435349819_thumb.jpg

post-124-0-79416000-1435349919_thumb.jpg

(5) Remove paint and rust from press, paint and polish.

post-124-0-97095300-1435350044_thumb.jpg

(6) Reassemble.

post-124-0-37129700-1435350123_thumb.jpg

Total cost of complete set £40.................well pleased!

post-124-0-85889900-1435350317_thumb.jpg

post-124-0-51590900-1435350248_thumb.jpg

  • Like 10
bobm12 Distinguished Member

bobm12

Posted
Posted

That is a cracking job Geo, you are a master at restoring! I particularly like what you did to the press and trueing the dies!

 

Cheers,

 

Bob

  • Like 1
Geo Distinguished Member

Geo

Posted
  • Author
Posted

PS didn't know you had a lathe. Wish I had room for one

Wouldn't be without it CB, I also have a lightweight milling machine. I put together a machine shop when I was building target pistols many years ago, now it so handy for both my motorcycle and horology interests.

post-124-0-45203200-1435391763_thumb.jpg

post-124-0-66002600-1435433663_thumb.jpg

  • Like 4
clockboy Distinguished Member

clockboy

Posted
Posted

Wouldn't be without it CB, I also have a lightweight milling machine. I put together a machine shop when I was building target pistols many years ago, now it so handy for both my motorcycle and horology interests.

attachicon.gifimage.jpg

attachicon.gifimage.jpg

Really nice set up Geo. 

  • Like 1
  • 2 weeks later...
Don Super WRT Addict

Don

Posted
Posted

Amazing work! Giving new life to an old tool AND saving money. Most of my money saving projects end up in the red. :rolleyes:

  • Like 1
chadders1966 WRT Addict

chadders1966

Posted
Posted

Looks great Geo, nice work. It reminds me that I bought a press very similar to yours meaning to convert it to take various dies I already have. You've inspired me to have another look at it, although I'll have to try and figure out a way to do it without the use of any similar equipment :). Not that easy when you're not particularly mechanically minded! Thanks for sharing.

Stephen

  • Like 1
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Very nice set-up. Couldn't help noticing the tiles on the wall is it the kitchen or the bathroom? :)

Thanks for the kind comment BL. It was a kitchen some time in the past.

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Mercurial
      Longines with 25.17 caliber

      By Mercurial · Posted

      How do the timegrapher readings look after the watch has been running for 24 hours? Are you using a phone app or a dedicated timegrapher to take your measurements? Best Regards, Mark
    • Kalanag
      Replacing crystal, do I need a bezel tool?

      By Kalanag · Posted

      From what I see, the crystal is made of mineral glass and is secured to the bezel with a sealing ring. If you might want to replace the crystal without removing the bezel or the movement, I think it's possible, but risky. You have to suck out the old crystal without breaking it into tiny particles. I would not do that. If you remove the movement first you can press the crystal out and press a new one in without removing the bezel.
    • Sebastiaan
      New hobbiest to watch repair from the Netherlands

      By Sebastiaan · Posted

      Hello Everyone, A short message to introduce myself. I'm Sebastiaan (50) from the Netherlands and have always been interested in watches. My two kids are at the end of their teens years and so I have more time to start a hobby.  Working on watches was something I always wanted to learn. So I recently started the watchfix repair course. Currently watching level 3. My short term goal is to be able to service the watches we (Myself, my wife and kids) own. I own a manual Omega Geneve from 1974, a small microbrand watch with a NH35 and a wittnauer bumper from 1940's. My wife owns an Oris, Seiko 5 with 7s26c and my son a seiko alpinist sarb017 and sports 5 with 4R36. So enough to learn on the short term..  Looking forward to talking to all of you and enjoying the watch hobby together. Greetings Sebastiaan
    • BlueHarp
      Longines with 25.17 caliber

      By BlueHarp · Posted

      It works quite well. The only strange thing is that it loses 2/3 mn per day whereas the measurements indicate that it is fast by 1/2 mn. Maybe something wrong with the gear mechanism ...
    • rehajm
      Longines with 25.17 caliber

      By rehajm · Posted

      Unfortunate…but you clearly have a Longines branded movement with a year 1936 serial consistent with the caliber. I checked the case maker of the last few Longines I worked on… …same as your watch, so certainly you have grounds to honestly describe your watch as a Longines cal 25.17 tank with unbranded dial…and given the modesty of the watch IMO the Longines authentication wouldn’t dramatically alter the value, if that’s what you are hoping…as nucejoe suggests the value will mostly be determined by how well it runs…
×
×
  • Create New...