Jump to content

Advice before I try and set the beat on Gustav Becker wall clock

RLang386

By RLang386
in All Things Clocks

 Share

Recommended Posts

RLang386 Member

RLang386

Posted
Posted

Now let me first say, forgive me (but let me know) if I use some words wrong, I know only the basic parts of a clock movement and I may occasionally use terms that are exclusive to watch movements...

I have this Gustav Becker wall clock that I've cleaned and oiled, and now it's time to set the beat on it. The beat error is pretty bad, to the point where even oiled and in otherwise good running order, the clock seems to randomly stop after five minutes, an hour, three days... 

On this clock the beat is governed not by a flexible pendulum clutch but by this little soft pin connected to the pallet, which is deformed to strike the sides of its openings at the appropriate points in the cycke. (See picture)

So far I've avoided it like the plague... I feel a light pressure from some tweezers will be enough to deform it. 

Does anyone have a good procedure they follow setting the beat on a clock like this? 

(I apologize for the quality of the image, it was running and my phone camera is very shoddy.)

IMG_20230106_141339.jpg

RLang386 Member

RLang386

Posted
  • Author
Posted
On 1/7/2023 at 12:07 PM, oldhippy said:

The photo is so bad it hurts my eyes. I need to see the back plate, please take a good photo. 

I'm afraid I don't have a better digital camera at the moment, sorry! Since taking the photo I've messed with it a little and it is currently running a little more evenly and I have the dial back on it. Next time it stops I'll take the dial back off and try to take better lit photos at least, which should improve the sharpness by shortening the automatic exposure time.

transporter Super WRT Addict

transporter

Posted
Posted

this is where testing is just as important if not more so than the actula servicng. You say you have cleaned and oiled it, did you bush any holes, polish pivots etc or were you lucky and it was in good shape? as with a watch clocks also succumb to friction, and a tiny amount of friction near the great wheel will be amplified at the escapement.

So back to testing, I wouild leave the movement ona test stand out of the case for at least one week running, then I would case it up and keep it on test.

This saves time when it comes to sorting faults out and also allows you a better view of the movement to see the faults.

As for the beat, before touching anything have you tilted the movement to hear the beat improve?

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Mark
      No images showing

      By Mark · Posted

      Did you just swear at me matey?? I’m sorry, I’m not divulging personal information but there’s always personal reasons. There’s not much more than I can do other than plod along as best I can. However, my health is good now and I’m regularly getting plenty of exercise to keep it that way 👍 You know what. The ads don’t even cover a small percentage of what it costs to serve this site. I find most of it personally. If there are complaints then so be it. I do my best.  in fact - I have zero issues turning them off. Would that make the complainers happy?
    • Neverenoughwatches
      No images showing

      By Neverenoughwatches · Posted

      Same question that was asked last time Hakan, and emphasis was placed on it. It was ignored. The thread should still be there, if not I have a copy of his reply. 
    • VWatchie
      No images showing

      By VWatchie · Posted

      This is probably the single most important point. One of my best friends, 48 years old at the time, suffered a massive stroke about 15 years ago. He barely survived, but his life was never the same after that. If you had asked me back then to guess which of my friends might have a stroke and nearly die, he would have been the very last one I'd have picked. He was perfectly healthy, played tennis three times a week, ran a successful business, was full of life, and had a wonderful wife and well-behaved teenage kids. The harsh truth is, we never know when it’s "game over." @Mark, I truly wish you a long, happy, and successful life. But have you given any thought to some kind of backup plan for WRT in case the worst should happen? Is there anyone who could keep the site going? If you can reassure us in some way, it would mean more than a lot to us!
    • Neverenoughwatches
      Swiss Army with foggy crystal

      By Neverenoughwatches · Posted

      Looks like glass with that bevel edge.
    • luiazazrambo
      WWW Eterna sucked me in.

      By luiazazrambo · Posted

      Update: The demagnetization only helped temporarily, maybe it pulled the wheels into a position where they liked each other. I have to adjust the sub second hand as it is a bit angled upwards and catching the minute hand stopping the whole movement but before this happened there were some wild deviations. HWGIKE#58 Alarm clock, cooked in hot cleaning fluid and oiled gently. This is a movement so I count it. 🙂 A while ago it tried to fly away one day, it was on my windows sill, we had strong wind the curtain flew like a flag and doing so encouraged my clock to do the same...  went out and ended up on the roof above the entrance door, its door in pieces but the clock itself suffered no damage otherwise. The original glass was already broken when I received it I still have the bottom part in two pieces. The new "glass" is acrylic. It also had a paper in the back in the case inside but it disintegrated, I still have a little bit of  piece of that too.     HWGIKE#59 Durowe 870 / Times M84 This particular instance is a D870, when I saw its worn out contact pin I thought that it must be a design flaw, and here we go: https://17jewels.info/movements/d/durowe/durowe-870/ An incredible movement again where the balance wheel drives the train and has two magnets one for the balance wheel/coil and one for the pallet. The magnet for the pallet is basically the "draw" one direction. The coil is about 1.8kOhm and one end is in contact with the main plate and the other end is soldered to a contact pin which is insulated by the means of putting it into a jewel and this contact pin is rubbing against a wire getting the energy/impulse as it is passing. Behind the contact pin there is an "impulse jewel" not sure why is it there... the wire seems to hit the impulse jewel first then the contact pin but maybe it is there only for insulation purposes? I was almost certain that the screw holding down the battery - (minus) clamp had no insulation washer.. i only noticed the green stuff around it coming from battery leakage... anyway the + and - had a shortcut which took me a while to realize.. had to fabricate one insulating washer on my own. The jewel settings were dirty but not it is all cleaned and oiled. The contact pin might work for a while but I am sure it has a short life. It is a front loader the whole thing is held together by the case so it is not possible to regulate it without putting it all together and taking the movement out of the case again, very inconvenient. A wonderful movement but not made for eternity only for the consumer market.  
×
×
  • Create New...