Jump to content

Recommended Posts

Posted

Here it is my oldest watch, and which in fact has a very strong sentimental value to me, as It was bought by my grand-father in 1917 and he weared it since then, until he died in 1971. When I was a little kid I enjoyed very much to sit on my grand-father knees and ask him to put the watch close to my ear to listen its harmonious "tic-tac"!

 

I inherited it some years ago, after being serviced by a professional watchmaker and it is working fine.

 

I wrote to Longines in Switzerland sending  its serial number and asking for some information. They kindly replied me informing that it is an "EMPIRE" model, in silver 0,90 with a 18.79 ZZ movement,  manufactured in 1916 and sold the 9th July 1917 to the watch-house "JULES MANGE" in Lisbon ( where certainly my grand-father bought it).

 

post-1304-0-46537400-1438884346_thumb.jp

 

post-1304-0-23290100-1438884408_thumb.jp

 

post-1304-0-91850200-1438884436_thumb.jp

 

post-1304-0-72863300-1438884470_thumb.jp

 

As you can see the silver case is a little too dark. Should I clean it ? If so, what is the best way to do it?

 

 

 

 

 

 

Posted

That's a lovely looking watch GuiBer. It's wonderful to own such magnificent family heirloom, I know because I now have my father's pocket watches.

Regarding polishing, I would only give it an occasional rub with a silver cloth to keep the oxide at bay.

Posted

Nice P/W shame about the dial. Take the movement out remove the glass and put the whole case in silver dip but do not leave it in too long, wash out in warm soapy water and dry, then buff with a good silver cloth. That is how I want about cleaning silver watch cases.

Posted

A silver dip for the whole case - and then an occasional exterior light polish with a silver cloth should be fine - but make sure the interior bits are cleaned completely of the dip before re-assembly.

 

It's a lovely watch - don't worry about the dial - that's part of its history.

 

Cheers,

 

Will

Posted

Mostly good advice here and it's been a few days so maybe you've done something already but in my opinion the patina is valuable and shows parts of the history, love your story, thanks for sharing, if you have to do something start with the lightest cleaning method first and work up to the strongest because once u do it u can't go back

Through watchmaking I restore connections in people's lives!

  • Like 1
Posted

Silver dip is not an abrasive so it will not harm the case the silver cloth has no abrasive parts to it, it is a smooth cloth it is for cleaning silver, the girls in the shop that I worked in would clean stock with both so it is perfectly safe for your P/W.

Posted

I don't think anyone thought silver dip was abrasive Oldhippy, it's just that it cleans every bit of tarnish off and sometimes I think an old watch looks better with some dark bits left untouched. I know this sounds a bit hypocritical coming from me who normally like to see most things looking like new!

  • Like 1
Posted

Thank you all for your suggestions! Perhaps I'll try first a light polish with a silver cloth. I don't want to get the watch in a "almost" like new condition.

 

For me the most important is its sentimental value, and a little of "patina" goes certainly well with its age! 

  • Like 2
  • 3 weeks later...
Posted

After a quick work  with a silver polish cloth, here is the result, which is good enough to me, keeping some "patina":

 

post-1304-0-85044700-1441548682_thumb.jp

 

post-1304-0-50151400-1441548734_thumb.jp

 

post-1304-0-62746200-1441548766_thumb.jp

 

 

 

 

 

 

 

 

 

 

 

  • Like 2
  • 3 weeks later...
Posted

You have an excellent family heirloom, I am a Longines Collector, nice piece!

I too have a similar story about my Grandfather and a PK I inherited.   Later in life that PK was responsible for getting me into Horology.

Kind of funny how something so small can end up sending you down a path in life.....  Or, should I say Up a path?   :woohoo-jumping-smiley-emoticon: 

Thank You for the great story.  

Cheers!

MeticulousOne

Rick 

Posted (edited)

Hi Rick, thanks for your words about the watch I inherited from my grandfather. 

 

I absolutely agree with you about the "magic" feeling transmitted by an inherited watch. I think this is because TIME is perhaps our big wealth, and our lives depend greatly on how we spend it!

 

A watch can eventually be a friend, a confidant, an adviser, but it surely is a "witness" of our lives, encapsulating in it our good and bad moments, that could have last seconds. minutes, hours...

 

So when you receive a watch that went along with someone for many many years (which is not so common nowadays), you are in fact receiving a bit of that person life history! And if that person is someone very important in your life, it's really amazing and comforting!

 

Cheers!

Edited by GuiBer

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I sure appreciate your comment! I will look into one of those or maybe something similar. I of course will check your video to have a better idea.  by the way, that’s a beautiful lathe! Mine is a little peersless, but I just bought a Boley & Leinen that is on its way. That’s the one I am looking a motor for. It comes with a motor, but I want to replace it for  one that has a speed controller.
    • Indeed. I would not attempt one. Here is my messy Sherline setup
    • This conversation is becoming a very confusing. The etachron system is a very nice system for manufacturing watches. As you know it consists of two components the stud and the regulator pins. Beautiful thing of this system is you can open up your regulator pins center the hairspring and as you close the pins they will close equally on both sides providing you centered it in the first place. It's not like you're going to become closer to one side or the other as the definition of the regulator pins is a bit confusing it's not exactly a slot sort of. I'm thinking maybe a little eight reading will be helpful for you. Then the file name was changed by me at the US patent but the wording of Seiko may or may not actually be attached to it soared up? I just did that so I can find it in my files. Normally patents are in people's name if they work for a company the company name will be there you'll notice the person lives in Japan which is interesting as the name would imply that this is a Swiss product. Somewhere I think I have the patents for the stud and I believe that is Swiss like a lot of things their Japanese and Swiss and then the Japanese let the Swiss name stand as it seems you more popular in case as you read up on the patents of the regulator pins or pin will see and it should explain exactly how and why it works also why it's important to always close at an open in specific directions because the pins actually have a shaped to them it's very hard to see the shape as it's very tiny.   As a reminder with this system it's mass-produced. I wouldn't be at all surprised if they use cameras and computers to do all of the adjustments.  The meaning of this is that the majority of watches will function as there supposed to and do what they're supposed to do the system will allow us for some minor in tolerance and has more than likely as I said no human hand is ever touched those watches that's the way they left the factory and they work fine. US2007091729A1 seiko etachron.pdf
    • These still seem stupid expensive for a bottle, but still £100 cheaper than than the Moebius ones. Anyone have any experience of these: https://www.cousinsuk.com/product/epilame-fixodrop-special-bottle-horotec
    • Yes, this is not a basic part. Here are some pictures of making one  
×
×
  • Create New...