Jump to content

Recommended Posts

Posted (edited)

Hi, I did some research and decided to change the 285V21GN flat faced crystal on my Seiko Elnix 0702-6010 for a faceted style. I ordered both 285V17GCAF and 285V23GCAF to see which I liked best. I figured that they would have a good chance of fitting as they all use the same glass gasket (EZ2718B). I found that the V17 was a straight swap with the V21 with identical glass frame dimensions. The V23 frame however had the same diameters of the various frame sections but the thickness B and C were different. The portion A that the gasket fits to was the same. If I had tried to use it on the Elnix then the bezel would not have pushed down fully. Photos and dimensions posted for future reference.

IMG_20230809_201841448~2.jpg

IMG_20230809_185619369.jpg

IMG_20230809_185811562.jpg

IMG_20230809_185842703.jpg

IMG_20230809_192314485.jpg

Edited by steve1811uk
Typos
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...