Jump to content

How Do I Remove This?

Elissar
 Share

Recommended Posts

Elissar New Member

Elissar

Posted
Posted

Purchased this compound slide for my Lorch & Schmidt 8mm lathe but upon receiving it I noticed the cross slide was backwards. No big deal, just disassemble it and reassemble it the proper way. Only as I tried removing the lead screw for the cross slide, the small steel bushing/shoulder piece came off which I have come to discover, isn't supposed to happen. Now it is stuck in the brass tube the lead screw sits in and I can't figure out how to remove it as the tube closes to the same diameter as the bushing/shoulder piece from one end (I can't just punch it out). 

 

So far I've tried penetrating oil with no success; I've tried heating up the brass tube around it hoping to break whatever potential corrosion or situation that's keeping it stuck. Maybe drilling a small hole to be able to fit a punch in and spin it around. I don't want to destroy it to take it out but will consider it if I can make or find a replacement. Any help or advice would be greatly appreciated, thank you.

(Attatched are photos of what I'm talking about and what my problem is.)

20230925_112227.jpg

20230925_112217.jpg

20230925_112144.jpg

20230925_112136.jpg

  • 5 months later...
Razz WRT Addict

Razz

Posted
Posted

Penetrating oil with some light smacks with a dead blow hammer? I have a problem with a rusted screw in a cross slide that I don't want to drill out and am hoping the oil and a few taps a day for a period of time will budge it at some point.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Ad Free WRT

      By Neverenoughwatches · Posted

      Thanks Mark, but can we still discuss the other important matter please and not be distracted from it. Thank you.
    • JohnR725
      Who's doing what in the world of watches today.

      By JohnR725 · Posted

      You're probably not going to see a dramatic change but you should probably figure out what the lift angle is as it probably is not 52°
    • Mark
      Patreon Free WRT

      By Mark · Posted

      In tandem with my last post regarding the removal of Google Adsense on this website - I have also decided to fully self fund this site as a gift to the watch repair community of which I’ve been a member of, and have benefited from since being extremely lucky to gain an apprenticeship back in the late 80s.    Well, that means that I have also closed down my Patreon account - or, to be clear, stopped all future transactions on my Patreon account and this is with immediate and permanent effect.    not to mention, but I will, I really really do appreciate the contribution all my patreon and PayPal supporters have provided over the years, you guys have been absolutely awesome and helped to keep this forum alive and available for those who might not be able to afford the payments.    again, from the bottom of my heart thank you.     
    • Mark
      Ad Free WRT

      By Mark · Posted

      My pleasure. I would rather pay more than have those annoying ads ruin this site. They were a terrible idea and something I never even saw much, but I was on my iPad yesterday testing a security update for the forum software and it was impossible. I decided then - they had to go!!! Also, co-incided with this, for those who are paying for pattern in order to help fund this site - I’ve just disabled patreon. Future monthly payments will not be taken.  PayPal is a little more complicated. I will try to work out how to cancel the few subscriptions but if you are a PayPal donator then please feel free to cancel the monthly sub.  I will, however thank you all from the bottom of my heart for helping to contribute to this site financially - it means a lot. But going forward, I’m funding it personally from my pocket and that’s the end of it 😄
    • JohnR725
      Ad Free WRT

      By JohnR725 · Posted

      Thank you Mark it definitely makes the site looked much nicer. Although I didn't mind the ads as long as it helped to pay for the messageboard but sometimes when you had the feeling that there were more ads than message board yes it was a little annoying. Thank you
×
×
  • Create New...