Jump to content

Recommended Posts

Posted (edited)

Offered to service and refresh my 90 year old father-in-laws 70 year old Hamilton Thin O Matic caliber 626 in a solid gold 14k case.

Has high sentimental value as it was the last Christmas gift he received from his grandmother before her passing in 1960 or so.

On first inspection, the watch looked like it just needed a good cleaning and full service. At full wind, it timed at 90 per day fast and 265 amp with very low beat error.

Upon opening the watch up however, discovered that the previous watchmaker took some liberties (missing parts!!!).

Fortunately there are several Hamilton 629 donor movements to be had on eBay for relatively low $$, and since this a cost no issue repair/restoration for my father-in-law, expecting a happy outcome. 

Still amazed at what some folks will do to unsuspecting customers (my father-in-law says he thinks he last had the watch serviced back in the 1980s).

IMG_1830.jpeg

IMG_1831.jpeg

Edited by Levine98
Correction
Posted
8 minutes ago, Levine98 said:

Offered to service and refresh my 90 year old father-in-laws 70 year old Hamilton Thin O Matic caliber 626 in a solid gold 14k case.

Has high sentimental value as it was the last Christmas gift he received from his grandmother before her passing in 1960 or so.

On first inspection, the watch looked like it just needed a good cleaning and full service. At full wind, it timed at 90 per day fast and 265 amp with very low beat error.

Upon opening the watch up however, discovered that the previous watchmaker took some liberties (missing parts!!!).

Fortunately there are several Hamilton 629 donor movements to be had on eBay for relatively low $$, and since this a cost no issue repair/restoration for my father-in-law, expecting a happy outcome. 

Still amazed at what some folks will do to unsuspecting customers (my father-in-law says he thinks he last had the watch serviced back in the 1980s).

IMG_1830.jpeg

IMG_1831.jpeg

Feel for you. Can't believe the unprofessionalism of some watchmakers. Mark's course really does teach us well.  Keep us updated with your service.

  • Thanks 1
Posted (edited)
37 minutes ago, RichardHarris123 said:

I don't understand, you said it was running well with parts missing?  

I mis-stated. With a manual wind it appeared to run OK on the timegrapher. It also set fine. During my initial exam and before I opened the case it didn’t dawn on me to check the autowind since I never imagined someone would salvage parts from what was surely a clients watch.

it wasn’t until I opened the case that I realized that much of the autowind mechanism had be scarfed. My guess is the last watchmaker figured my father-in-law would not notice since he actually hardly wore the watch (I’ve never seen it on his wrist and I’ve known him since 1982).

 

Edited by Levine98
  • Like 1
Posted
18 hours ago, Levine98 said:

it wasn’t until I opened the case that I realized that much of the autowind mechanism had be scarfed. My guess is the last watchmaker figured my father-in-law would not notice since he actually hardly wore the watch (I’ve never seen it on his wrist and I’ve known him since 1982).

one of the problems with guessing is did you guessed correctly? For instance your father-in-law takes the watch in for servicing is an automatic watch don't you think he would notice that it doesn't automatically wind anymore? Seems like that's something you would notice?

so other scenarios would be the automatic winding ceased to function and the parts were removed. Although it seems like you would return the parts to the customer. Plus the customer would know that it's now a manual wind watch is not a automatic wind watch. then if this did occur didn't necessarily occur with the last watchmaker.

 

then for those that would like to see what the watches supposed to look like with all of its parts

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Hamilton_629

 

 

 

Posted
1 hour ago, JohnR725 said:

one of the problems with guessing is did you guessed correctly? For instance your father-in-law takes the watch in for servicing is an automatic watch don't you think he would notice that it doesn't automatically wind any

Honestly don’t think so. My father-in-law is an extreme introvert who lives completely in his head (retired mathematician & physicist). In spite of his genius, even when he was vital he couldn’t refold a paper map or figure out how to work the car radio.  I know he never wore the watch and doubt he ever even knew it was an automatic wind (because he would never have bothered to associate “Thin o Matic” with auto wind.   

anyhow academic now—he suffered a stroke 3 years ago and lost his wife of 67 years during the pandemic—doesn’t wear a watch or say much of anything now (we take care of him). He honestly doesn’t even remember when he got it from his grandmother, but does know she gave it to him sometime a long time ago (must be between 1959-1961).

my wife found it while cleaning up/sorting through some of his stuff since she is responsible for ensuring his things are in proper order—she wants me to restore the watch so he can pass it on to his oldest (my brother-in-law) when the time comes to sort out his legacy.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • From what I see, the crystal is made of mineral glass and is secured to the bezel with a sealing ring. If you might want to replace the crystal without removing the bezel or the movement, I think it's possible, but risky. You have to suck out the old crystal without breaking it into tiny particles. I would not do that. If you remove the movement first you can press the crystal out and press a new one in without removing the bezel.
    • Hello Everyone, A short message to introduce myself. I'm Sebastiaan (50) from the Netherlands and have always been interested in watches. My two kids are at the end of their teens years and so I have more time to start a hobby.  Working on watches was something I always wanted to learn. So I recently started the watchfix repair course. Currently watching level 3. My short term goal is to be able to service the watches we (Myself, my wife and kids) own. I own a manual Omega Geneve from 1974, a small microbrand watch with a NH35 and a wittnauer bumper from 1940's. My wife owns an Oris, Seiko 5 with 7s26c and my son a seiko alpinist sarb017 and sports 5 with 4R36. So enough to learn on the short term..  Looking forward to talking to all of you and enjoying the watch hobby together. Greetings Sebastiaan
    • It works quite well. The only strange thing is that it loses 2/3 mn per day whereas the measurements indicate that it is fast by 1/2 mn. Maybe something wrong with the gear mechanism ...
    • Unfortunate…but you clearly have a Longines branded movement with a year 1936 serial consistent with the caliber. I checked the case maker of the last few Longines I worked on… …same as your watch, so certainly you have grounds to honestly describe your watch as a Longines cal 25.17 tank with unbranded dial…and given the modesty of the watch IMO the Longines authentication wouldn’t dramatically alter the value, if that’s what you are hoping…as nucejoe suggests the value will mostly be determined by how well it runs…
    • It's difficult to tell, but my guess is it just looks like it has a bezel. Once you have removed the movement, you should be able to tell. Either way, I think you should be able to press out the old crystal from the inside as long as you have a die that properly supports the area around the crystal. So, take it a part first and then assess if any additional tools or actions are needed. Let us know how you do!  
×
×
  • Create New...