Jump to content

Finally deciding to say hello...

WhaleWatchM7

By WhaleWatchM7
in Introduce Yourself Here

 Share

Recommended Posts

WhaleWatchM7 Member

WhaleWatchM7

Posted
Posted

I've been a lurker in these forums for a few years but for whatever reason never got around to introducing myself, so hello!  

First, I want to thank @Mark, @clockboy, and @oldhippy for making this place such an incredible resource for those of us interested in watchmaking. This community has saved me countless hours, dollars, and frustration during my self-education in this great craft.  Like many newbies, I dove in too deep, too fast, and had it not been for the life-preserving wisdom tossed out in these forums, I probably would have given up a long time ago. 

In the not-too-distant past, work and family absorbed enough time that watchmaking only happened intermittently, but with the kids grown up and my work life on a glide path toward retirement, I'm looking forward to spending more time absorbing as much as I can and getting my skills to whatever point possible before Father Time arrives with  the inevitable. 

Thanks to all of you who have no idea how helpful you've been to a fellow watch enthusiast in New England. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Hour hand won’t go past certain spot when adjusting time forwards

      By HectorLooi · Posted

      If the watch is new, just return it to the seller for a refund or replacement.
    • Randy55
      Hour hand won’t go past certain spot when adjusting time forwards

      By Randy55 · Posted

      Keevo, Welcome to the group ! I'm thinking that you have some damage to the hour, and/ or minute wheel. Possibly just a bent, otherwise damaged, or missing tooth.   Your photo didn't post that I can see. I think you'll have to open it to start really finding the issue. Best, Randy
    • Neverenoughwatches
      Diy rotary cleaning machine

      By Neverenoughwatches · Posted

      An industrial break cleaner , like Holts does a good job of rinsing off paraffin 
    • mikepilk
      Cap jewel with what looks like a circular engraving around the edge

      By mikepilk · Posted

      In cap jewels on several watches I have serviced over the years. I've recently serviced a couple of Longines movements where the cap jewels were colourless. They are a real pain. Without colour they disappear when immersed in any liquid for cleaning 😲 Not necessarily. Cousins do a 10ml bottle for £26 which will last me for years. That's just half the price of a simple Bergeon silicone cushion, so not too expensive 🤣
    • BobG
      Etachron regulation system

      By BobG · Posted

      I wanted to post an update as I have two movements running really well now, 230-250 amplitude , 0.5 and under beat error, and +/-8 seconds or so. I removed the hairspring assembly in order to start over and noticed that the terminal curve between the stud and regulator arm was distorted. The stud was lower than it should be. I massaged the curve to look pretty good and reinstalled it. I followed Alex's video advice, best I could with 10x magnification, and with the regulator arm set in the middle of the curve I adjusted the stud so the spring was centered. I then made sure I could move the regulator arm the entire terminal curve without upsetting the coils. I then put it back on the Timegrapher and began closing down the regulator pins until I saw a change in amplitude which means to me that the pins were now pinching the spring. I opened them slightly and it looks good except I have a 0 on dial down, +3 on dial up but -16 on crown down.  I'm a bit stuck on how to adjust out the positional error. I also noticed a drop in amplitude, 180-200 on crown down. In the other video link I posted at about minute 26 if I remember he adjusts out positional error by manipulating  the regulator pin gap. With crown down the hairspring falls away from the pin and the rate slows so he closes the pins a bit to keep them tighter in crown down position. That means the spring is tighter on dial up as well but then he moved the regulator arm to slow the movement.  There must be some Seiko experts here that have some methods for dialing out positional errors. 
×
×
  • Create New...