Jump to content

New to Watch Repair -- Little over a year in and still excited about it

ooteenie

By ooteenie
in Introduce Yourself Here

 Share

Recommended Posts

ooteenie Member

ooteenie

Posted
Posted

Hello, 

I am relatively new to watch repair having started at the end of 2022. Over the last year I have worked on a number of movement, largely through disassembly, cleaning, and assembly with the hope of returning a movement to working order or to get one ticking. I have made several investments that were life changers such as a microscope (Amscope with camera) and an L&R watch cleaning machine and have worked to make my investments in quality tools vs. just the junk knockoffs.

I am generally working on less expensive but still quite nice movements. Most of what I work on I source from ebay and then what works well and looks presentable after my work I try to re-sell to an owner who I hope will make use of the watch that may have been neglected previously. My goal is to make my hobby self sustaining as much as I can, Ideally the amount I invest I can recovery, but I am not aiming for massive profits. 

My ultimate goal is to learn as much as possible so that I can become proficient enough to resuscitate  a movement with issues such as broken pivot, new jewels, bent hairsprings etc. I am also very interested in watch case restoration. As a trained inorganic chemist, electroplating is something I would love to take on. It is an art, but it is also an informed art where some knowledge of chemistry is likely to be very useful. That will come in time, now its all movement focused. 

  • Like 1
CYCLOPS WRT Addict

CYCLOPS

Posted
Posted

Hi and welcome, check out Rio-Grand for plating and anodizing related items and other stuff, they are a great source for product and info, I know you have probably already viewed plenty of videos......

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • coreymsnow
      A lathe with indexing that won't break the bank?

      By coreymsnow · Posted

      Hi folks, I'm doing some homework on getting a watchmaker's lathe, and it's clear I have a lot to learn. But I know one goal: I want to be able to fabricate wheels, which would require an indexing capability. I know how to use large lathes- like, giant metal lathes- but my experience is a few decades old now (but you never forget the smell of the metal cutting oil). So I'm looking to learn anew, and have a goal to get to a point where I can fabricate some basic watch parts. I also have no specific timeframe and want to do this right, so I'll be patient and learn what I need to before spending the money. I know I'm not going to get anything for a pittance, but I'm also not really able to put together the scratch for a $5-$10k lathe. What's out there for a hobbyist that can either handle some fabrication out of the box or can be relatively easily made to do so? Thanks!  
    • Nucejoe
      Good afternoon from Marbella, Spain

      By Nucejoe · Posted

      Hello and welcome to the WRT forum.   This usually points to broken balance pivot.  Though a watch in need of clean & lube can do the same. Easiest diag would be to  see if balance pivot doesn't stay in hole jewel of the setting, when you lift one side of balance rim with an oiler or gently with pair of tweezers. Another would be to detach balance complete from the cock and take a look at pivot under high maginfication.  Regs 
    • MikeEll
      Help with Hermle ships clock

      By MikeEll · Posted

      Ahhh, yes.  I hadn’t thought of that.  I’ve serviced quite a few of these and the first time I didn’t realise it was a ships strike pattern!  Ha ha, confused me totally until I realised.
    • RichardHarris123
      Good afternoon from Marbella, Spain

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • Rixy
      Help with Hermle ships clock

      By Rixy · Posted

      Hi Mike, I did, thanks. Found this clip that was really helpful:   It says Seth Thomas but it's actually the same Hermle I've been working on. I'd had it working correctly all along but hadn't noticed that the lever with the sprung end stops the hammer a bit short of the bell on the second ding at the end of the half-past sequence. If only I'd put the bell on when testing, rather than just looking at the hammer, my ears would have told me it was working,  even if my eyes didn't!  
×
×
  • Create New...