Jump to content

Recommended Posts

Posted

Hi everyone,

I have an Enfield clock that has a Westminster chime. The problem I have is the strike strikes on the hour as it should but it also strikes at the half hour too. The chimes are correct on all quarters. If anyone could guide me and tell me what may be happening I would be very grateful. Thank you for reading.

Posted

Hi enjoy the forum, The Enfield clock should strike the hours and strike once on the half hour.. A picture of the clock movement is always helpful. 

Posted

Hi thanks for your response I have not took the works out of the clock as yet. It was my grandma’s it has not worked for 40 years. Maybe needs cleaning and re oiling?

 

Posted

Hi and welcome.

I have had similar trouble with an Enfield Westminster clock. It was to do with the release on the quarter hours.  On each quarter there is a pin on a star wheel that lifts a lever. One of those pins is longer than the other three and should release the lever on the o'clock. This is linked to a self-correct system so if the clock is started and the chimes are in the wrong position they will reset. On my clock this reset wasn't working and the long pin was releasing on the half-hour instead of the o'clock. This was enough to nudge the strike chain for one strike at half past and the chime wheel was still able to release the hour strike on the o'clock. 

Sometimes I find that dismantling  cleaning and reassembling is enough to put this sort of thing right.

When you send in some photos I'm sure lots of people will be able to help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I put the original broken glass (whats left of it) behind the acrylic. This is how it originally looked like. A cheap clock but I like it. Very noisy when the alarm comes wake up guaranteed! 🙂
    • If at all possible, find a service guide for the automatic movements your work on, because the lubrication procedures may have different requirements or rely on oils you would not use in a manual wind train (in addition to the braking grease you mentioned). Some autos like older Seikos do not have a manual wind option, so the procedure of letting down the mainspring without being able to use the crown may require a screwdriver in the ratchet wheel screw and great care. Do you have an auto movement you were planning to start with?
    • I am an amateur, so there's that. I do not get fixated on amplitude, lift angles, and beat error. However, 4.8ms would bug me if it were my watch. But you must judge your own skills to appreciate the possibility of going backward. I suggest, that you button it up let your friend enjoy the watch for now. As your skills progress, come back to it and correct it. I assume that this watch has a fixed hairspring pin. Some modern watches have an adjustable pin along with adjustable regulator. These are trivial to get in beat. I own a valjoux 726 my dad gave me on my 18th birthday (a looooong time ago). I broke the ratchet wheel with an aggressive wind 4 yrs ago. I have been waiting for my skills to progress before doing a service. I am close. Your advice is well placed and I will apply it.
    • I didn’t find any anomaly to the left of the red mark…reflection? this is the balance in its pivot in the inverted assembly. i can’t see any obvious kinks  and the spring is flat as far as I can see. Either the stud screw is missing, or it’s glued in… I don’t know. I’m loathe to fiddle with it. Any further insights? Thanks!
    • Update!  I've dismantled it, cleaned all the glue off, and rebuilt and lubricated the base movement. I'll leave the chrono part for another day. It's running well - great amplitude and keeping time, but it's got a beat error of 4.8ms.    How important is it to correct this? I'm worried that the potential for making things worse having to take the hairspring off and on repeatedly to adjust this. Would anyone here accept it at that?
×
×
  • Create New...