-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
Good thinking, I'll drop them a line and let you know what they come back with.
-
Hammer time can cause some burrs, so don't forget to check for those after using the smoothing broach. A large size Seitz reamer is perfect for removing burrs.
-
The stoppage started day three after crystal replaced. Final adjustments made prior to stoppage were as followed: 1 made minor adjustment to move the rate lever to the negative side in effort to slow it a bit. 2 closed the watch back up. 3 did the Seiko wobble and noticed a different sounds of metal on metal. 4 reopened the back and found a screw had backed its self out. Tightened the screw and now stopped or stuck movement. All was in working order prior.
-
" and HER stroke must be just right" 🤣 Wouldn't get away with that these days.
-
So the reverser does transfer power. But might do so in only one direction , either clockwise or anticlock. So, if you will please let us know, does ratchet wheel turn , regardless of which direction , you manually turn the rotor.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.