Jump to content

Recommended Posts

Posted (edited)

I find it interesting to use a website that will tell you what items have the most bids or watchers using standard criteria eBay search.   In an effort to "learn" what the market is doing.  And no, this is not a get rich plan.  More a don't flush money plan....I seem to have found the toilet lever.  

The below watch is from US shipper.  I limit myself currently to just US sellers to reduce complexity, risk.  As a lark I tossed in a bid a dollar higher this morning with the belief I'd be quickly outbid. Well, I'm still the high bidder for this 17J 352 automatic movement.  I thought Longines are high end watches.  Maybe I will be ready to service in 2-3 years but not now.  Please outbid me 🙂   Item 256569152990   I really do not need this.  All I had to drink was coffee.

image.thumb.png.1941991da017ae99d45f566fc570c711.png

Edited by durant7
typo
  • Haha 1
Posted (edited)

Don't worry. The bots will outbid you in the last minute.

Edit to say that's a nice watch, tho. I just serviced a 343 Longines, and it was a treat, if a little unusual.

 

Edited by ManSkirtBrew
Posted

That is a relief.  Two people wanted it more than me thank goodness.  The winner went manual bid mode and amazingly placed 6 manual bids in 19 seconds.  Some find it to be a rush.  I usually do not win and...happily I need nothing just bottom fishing for movements to learn about, practice on.  

image.thumb.png.701cec7bc48e7107449e5d0a00285cc7.png

Posted
4 hours ago, durant7 said:

That is a relief.  Two people wanted it more than me thank goodness.  The winner went manual bid mode and amazingly placed 6 manual bids in 19 seconds.  Some find it to be a rush.  I usually do not win and...happily I need nothing just bottom fishing for movements to learn about, practice on.  

image.thumb.png.701cec7bc48e7107449e5d0a00285cc7.png

The guy will have set in a maximum bid that kicks in a new figure everytime someone places a single higher bid or their maximum steps up. A sneaky way to win is to snipe bid in the last few seconds but i think even that was pointless against sniping softwear previously. Recently I've noticed something new, the outcome is sometimes delayed while ebay determines the winner, so regardless of what bid is placed at the dead point of auction end the highest maximum overall bid takes the item.

The highest maxiumum bid that is set during the aution's open time. Though frowned upon , what i like about sniping is the fact it can avoid getting into a maximum bidding war with others that watch the last hour. They up their maximum bid then you up your maximum bid and so on. Placing your max in the last few seconds prevents all that drama 😆, you either win or you dont. I like to close my phone case and not look at the final result for an hour or so 🤣

Posted

You need to discover the joys of the 404 and 1010 clubs. Guilt free bidding for your morning coffee time that rivals said coffee in price (assuming you go the Starbucks or similar route). Plus, some cheapies to notch your bedpost with to gain the skills for some of the more exciting fare.

17 hours ago, durant7 said:

I find it interesting to use a website that will tell you what items have the most bids or watchers using standard criteria eBay search.   In an effort to "learn" what the market is doing. 

What site is this?

Posted

For whatever it's worth, this same method is how I bought first my staking set and later my jeweling set. Each time "oh what's wrong with a low bid when we know someone else will snipe it at the end!" ... well before I was ready to actually spend on those tools or do any research on either.

Posted

The website can be found.

http://www.watchcount.com/bids.php

It does not help me find the diamonds in the rough for practice tear down and rebuild.  But I do find it interesting what the secondary market is.  I put in watch -apple -rolex -omega to exclude brands I am not interested in learning about.  Here is the staking set with the most bids.

image.thumb.png.4b2377e3685f2066cdc3bfb1a98708e5.png

 

As for 404 or 1010...  As a newb I am paying high.  Seeking the Caravelle 11DP cheap stuff....so far I have three but one turned out to be a 17J AS 1686.  A win.  My best win....for me....has been the below.  Turned out to be an ETA 2372 for $10.  I can see buying lots is the way to 'average down' your each unit cost.  But in a 7 watch lot, often 6 of the other watches have a value of $0.  So USD$30/7=$4.29 is really....  $30 for one watch.  And then you have the Seiko movement insanity.....phew  
image.png.df0443e38325cc9d316ffb6a7e4dbcbf.png  

Posted

I only buy 404s with fully jeweled movements and all stainless cases, personally. I've bid on one lot, and it was a bunch of identical NOS fully jeweled French watches in silver plated cases. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I’ve been playing with a NH35 movement that which has the classic Etachron regulation system and a few balance assemblies as practice. What I’m trying to do is get comfortable with the effect both the stud and regulator pin positions have on rate and positional error. When I install a new balance assembly I install it with the assembly in place  on the cock and cock is attached to base plate. I use the back of the tweezers to push the stud into place and feel the click. However, I noticed that the angle of the stud can be adjusted and what I also noticed is that some movements have the stud carrier arm bent down a little and that changes the angle of the hairspring leaving the stud. This angle effects how the spring goes through the regulator pins and also the spacing of the coils opposite the stud. What I thought I was supposed to do is set the regulator block in the middle of the curve, open the pins, and use the stud angle to center the spring.  Then the stud is set.  Now on all the new NH movements I have seen the angle of the regulator block is about 60 degrees counter clockwise from full open. I watched a video where the author used the regulator pin adjust to adjust rate and position error. When I close down the pins I do notice that the rate increases but also the amplitude drops, the coil spacing changes and hairspring appears slight straighter between the stud and the regulator block. If I open the pins the amplitude comes back, the spring breathes a bit more between the stud and the regulator block and the rate slows.  So, a long post I know but I would really appreciate any advice on how to correctly adjust the etachron system for rate, amplitude and positional error.   
    • Aw come on Andy, it was just a comparison between spending 30 quid and tackling a tricky piece of work. You appeared to be volunteering,  i volunteer for stuff all the time it gets me into all kinds of trouble.
    • It's not really shown here , but the blade flips over, so it faces the other way. The knob and threaded case holder then pushes the caseback seam into the blade. Once the blade starts to penetrate into it, the lever and blade are lifted , which should hopefully pop the back off. A lot of fashion style cases have very tight seams and need a sharp blade to start separating them.  Don't buy the cheaper plastic versions of this tool, the posts with the pins through for blade holder break easily if the apply extra force to blade. 
    • You will still be looking for a balance complete I’m afraid, this is the balance staff, balance wheel and hairspring in one package. Hairspring and the balance wheel are matched in the factory. Whilst we can change a balance staff the hairspring and balance wheel stay together.   Tom
    • The hairspring end has come adrift from the small terminal barrel.  I have tried to remove the taper pin to relocate it, but the task is beyond my skill set, eyes, hands and being in my 70s, probably beyond my life expectancy.  It is not too badly mangled on the end.  On the ebay offer, that really is a bit on the rich side.  I'll keep looking, maybe a good hairspring will turn up with a shot balance staff. As for time spent on knees.  I made up one of these from 3M magnetic tape and a piece of wood.  It works well for magnetic parts. Other things I have suffered with.  I found lubricants so very expensive that I bought some very small syringes and tiny needles.  I just decant a drop into my oiling pots when I start a movement and the remainder keeps really well in the syringes. Finally identifying the correct screw for the part led me to make up the board in the final pic.   Thanks for the info. Kind regards   Chris  
×
×
  • Create New...