Jump to content

Recommended Posts

Posted

It appears that the movement parts include some stamped brass and CNC machined shafts. Also various unfinished or rough looking parts, that I do not think would be allowed by any decent clockmaker.

I don't think it's very old. Another modern reproduction.

 

Posted
58 minutes ago, rjenkinsgb said:

It appears that the movement parts include some stamped brass and CNC machined shafts. Also various unfinished or rough looking parts, that I do not think would be allowed by any decent clockmaker.

I don't think it's very old. Another modern reproduction.

 

You are right it is another Chinese fake. The chinese carriage strikes always show the striking works on the back plate and not between the dial and front plate. The bell is poor and it always has two holes in it. You hardly ever have a sweep seconds hand on French carriage strikes. The platforms are normally of a white/gray metal and the platform screws are not positioned as you find with the French types which have four screws while the chinese tend to have three.   

  • Like 1
Posted

When did these Chinese fakes first appear on the market?

The escapement look like the ones used in Russian marine clocks. 

The brass is also not polished like French clocks.

Posted (edited)

You are both having a go which is good. I do have a good laugh over these little teasers. Don't forget I have years of experience when it comes to clocks, I don't expect many to hit the nail on the head first time.  

Have a go Neverenoughwatches and RichardHarris123. Pick the bones out of this when I saw it I burst out laughing, I thought this is just right for my friends to have a go at. Who ever points out the most will be the winner. 

https://www.ebay.co.uk/itm/387233272748?itmmeta=01J3WPVATMKS5HVVJGGE3WBMC1&hash=item5a28e6d3ac:g:1OAAAOSwol9moQNn&itmprp=enc%3AAQAJAAAA8EoDZyfT4GyLjd12NszUtkN9SX0X9853H7dCKOw94IvUoCsmIBczBBXUbuIfBmQNL5CtJfIAr0Q0eVboBbCjUUO6YCYgYRUhGbrt%2F7vvvsyw9XTtluOYYiZrDJBa8i3axwK4TNmQHvQGnLwIAKebUZDjrfTpH2430QGND8cEF%2FA59AWJYq9fiwWspGcEEx8GV4lGoxNxI55gG1%2B0OIsJseZPBNxN4jIhyIWUh0RtxEdvt2hO3jB%2FvXQCM96X3hyFmArPfKVQYJ%2Bte4DpsWhS0Dx0ljliJPJl%2ByeKencsJE1g8IbiWL%2FEtGNEXYDdHzY1ig%3D%3D|tkp%3ABk9SR7Ct7ZafZA&edge=1

Edited by oldhippy
Posted

No clock guy but I did spend many hours sitting quietly whilst my grandparents visited their friends who had them 

1 it has a seconds hand!

2faceplate is warped as it is too thin for this type of clock

3 pendulum and rod(?) look very poor quality 

4 no weights, looks like it might be spring driven?

5 case looks like it’s from a 100 year old coffin that’s been dug up

 

hope I got at least one right 😂

 

Tom

  • Haha 1
Posted
6 hours ago, tomh207 said:

No clock guy but I did spend many hours sitting quietly whilst my grandparents visited their friends who had them 

1 it has a seconds hand!

2faceplate is warped as it is too thin for this type of clock

3 pendulum and rod(?) look very poor quality 

4 no weights, looks like it might be spring driven?

5 case looks like it’s from a 100 year old coffin that’s been dug up

 

hope I got at least one right 😂

 

Tom

 

51 minutes ago, RichardHarris123 said:

Wrong again, I'm going for the record of incorrect answers   @Neverenoughwatches, eat my dust.  

I cant get right what i dont answer, so by default that makes me the winner 🤣

 

My trained joiner's eye tells me it isn't level, my other eye tells me that i may also be wrong about that. Whats the chances of.....2 guys that go by the name of Richard, that live in Yorkshire and both of them know f. all about clocks 🙂

1 hour ago, RichardHarris123 said:

Neverenoughwatches, eat my dust. 

Put sauce on it and I'll eat it mate.

  • Haha 1
Posted (edited)

A weight driven movement without accessible arbors through the dial. Might be wound like a cuckoo clock?

IMG_6711.thumb.jpeg.9456705eb7001bbeea871866df680c25.jpeg

Could it be an one-hand movement with just an hour hand? The minute hand is replaced by the numbered disk behind the dial. Then not only the hands but the dial with minute numbers are wrong here!

IMG_6713.thumb.jpeg.db2b82bafba6c0eaab3097f406d4877b.jpeg

Here is an example of a (hopefully) genuine one-hand clock:

IMG_6712.thumb.jpeg.584bd2b3d94007d3b58107226245f9b1.jpeg

IMG_6714.thumb.jpeg.31aacaaa3cf192a487fa60f5673fd5ca.jpeg

Edited by Kalanag
Posted

It looks like Mr. Caygill of Asrigg liked that general style of movement, with various complications - there are a few other examples around that look to to have similar movements? eg.

https://drumfarmantiques.co.uk/shop.html#!/products/an-18th-century-oak-longcase-clock-0x2c--the-dial-inscribed-caygill-0x2c--askrigg

https://www.johnmoran.com/auction-lot/a-george-iii-caygill-of-askrigg-tallcase-clock_8C343C9979

 

One without winding holes in the face, as with Oldhippy's example, but movement not shown:

https://auctions.tennants.co.uk/auction/lot/1405-an-oak-thirty-hour-longcase-clock-painted-arch-dial-inscribed-c-caygill-askrigg-late-18th/?lot=2174874&sd=1

 

 

Posted

So what we have is a complete nightmare. It is a marriage but it is obvious, when a marriage is created with clocks it is done in such a way that only those with a professional eye now what to look for, but this a blind person would spot it.

So first the movement, the reason it has no key holes it is a 30 hour movement they work on a continues chain or rope  and you wind it up by pulling on the chain or rope it works on  a single weight, some also have a tiny weight which is called a donut and it helps to feed the chain such as prevent tangling. It strikes on a count wheel on the back plate which you can just see. This dial is a bit of a mystery because the number 5 has a short tail which was used up until 1710 but the pattern should be latter? As for the sweep second hand as you can see it is a modern red one they never existed not in 30 hour movements, I’m wondering if the seller just stuck it in to make it look good the other hands are modern and the look as if they are from a battery movement. You can tell by the movement and the room it has sitting on its seat board that the case doesn’t belong. The case or should I say the hood is in the style which is called Swan neck very popular. The long door is a sign of around the nineteenth century. As you see it really is a bag of spanners.

Kalanag is the winner as pictures were found and the info was very good.

Thanks all for taking part in the fun

  

  • Like 2
  • Thanks 1
Posted

If you could find the correct movement or case it would never be worth it. These days people are after the complete originals. I wouldn't give them house room. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • If at all possible, find a service guide for the automatic movements your work on, because the lubrication procedures may have different requirements or rely on oils you would not use in a manual wind train (in addition to the braking grease you mentioned). Some autos like older Seikos do not have a manual wind option, so the procedure of letting down the mainspring without being able to use the crown may require a screwdriver in the ratchet wheel screw and great care. Do you have an auto movement you were planning to start with?
    • I am an amateur, so there's that. I do not get fixated on amplitude, lift angles, and beat error. However, 4.8ms would bug me if it were my watch. But you must judge your own skills to appreciate the possibility of going backward. I suggest, that you button it up let your friend enjoy the watch for now. As your skills progress, come back to it and correct it. I assume that this watch has a fixed hairspring pin. Some modern watches have an adjustable pin along with adjustable regulator. These are trivial to get in beat. I own a valjoux 726 my dad gave me on my 18th birthday (a looooong time ago). I broke the ratchet wheel with an aggressive wind 4 yrs ago. I have been waiting for my skills to progress before doing a service. I am close. Your advice is well placed and I will apply it.
    • I didn’t find any anomaly to the left of the red mark…reflection? this is the balance in its pivot in the inverted assembly. i can’t see any obvious kinks  and the spring is flat as far as I can see. Either the stud screw is missing, or it’s glued in… I don’t know. I’m loathe to fiddle with it. Any further insights? Thanks!
    • Update!  I've dismantled it, cleaned all the glue off, and rebuilt and lubricated the base movement. I'll leave the chrono part for another day. It's running well - great amplitude and keeping time, but it's got a beat error of 4.8ms.    How important is it to correct this? I'm worried that the potential for making things worse having to take the hairspring off and on repeatedly to adjust this. Would anyone here accept it at that?
    • Since I've been banned from the previous discussion, apparently my language was inappropriate...for small boys. I will start another thread and act in a more decent manner for the girls and ladies of the group.  Please what will happen if the forum can't be managed by the administrator, are there provisions in place to preserve the achived member's questions and answers over the years. Please if I may ask these important questions that are important to the members please.
×
×
  • Create New...