Jump to content

Recommended Posts

Posted

Hi everyone and thank you for accepting me. I'm a teacher and recently got into watches, I'm about to turn 50 and treated myself to a nice watch. I got a Momentum Torpedo Pro Eclipse - Solar [44mm]. But it stops working whenever I wear it!! Take it off and set it down, works fine, put it on stops after 15-30mins????? Momentum sent me a replacement but I'm curious why this would be. Any ideas? 

Posted

There are a few people that have static in there body all the time. I'm not saying this will put it right for all but a small round plaster stuck on the back of the watch, so between you and the watch no direct contact sometimes works. So give it a go and let us know. 

  • Like 1
  • Thanks 1
Posted

Hi and welcome to the WRT forum.

 We all are Mr STATIC,  Oops I sure hope your students don't read this . 😂 lol

 As we walk specially if one drags his foot on the ground/ carpet..... etc . We collect static electricity in the capacitor our body is, as our body  contains many  elements which charge no $ fee to host charged electrons. 

Rgds

 

 

 

 

  • Like 1
Posted
2 hours ago, oldhippy said:

There are a few people that have static in there body all the time. I'm not saying this will put it right for all but a small round plaster stuck on the back of the watch, so between you and the watch no direct contact sometimes works. So give it a go and let us know. 

I've heard about this before, I dont think it was static related though, something else going on in the body. I was permanently static charged as a kid, my dad constantly getting me in a headlock and rubbing his knuckles on my head 🤨.

  • Like 1
Posted
2 hours ago, oldhippy said:

There are a few people that have static in there body all the time.

I'm one of those. I have an extremely low skin resistance and at those funfair strength testers where you grip two metal rods to test your "strength", all I have to do is lay one finger on each rod and the meter goes off the scale, the lights and alarms all go off.

I recently changed a new pair of sneakers and the insulation must be really good because I store up a charge very quickly and touching anything that is grounded will give me a slight tingle. And this is in Singapore, where it's so humid that static electricity hardly ever builds up.

But coming back to the watch, I don't think static electricity can affect the electronics as the metal watch case acts as a shield.

The possible explanations I can think of for the puzzling problem is

1) Temperature - it could be your body heat is causing a bad solder joint or contact point open the circuit. You test this by heating up your watch in an oven or with a hairdryer. 

2) Movement - it could be a loose contact that opens when jarred around.

3) Gravity - it could be a loose contact that comes open when the watch is no flat on its back.

  • Like 2
Posted

Thank you everyone. If the cause was static wouldn't that effect other watches? I've never encountered this before. 

HectorLooi's 3 reasons sound plausible. Sounds like it would be repairable.

Many thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • By the way, I opened my watch, looked under a magnifying glass, there is simply no grease, the screws are without traces, the slots are intact.I think it's just a matter of maintenance.there are no rotor marks on the body. And to remove the strap from yours, just press on the 1st side,and slightly move the strap, then on the other side and it will come off.
    • Hi My name is Chris. Just started trying to learn about watch and clock repair as a result of repairing my fathers old 1890s police station clock (about a year ago). The clock was Ok, but having graduated to pocket watches and then wrist watches, despite the really excellent stuff on Youtube, I am struggling a bit.  As a retired engineer, I find the engineering exquisite, but a bit on the fiddly side.  I have done a few practice watches with a little success but failed a few, but have had success with Seiko 7005s, 7009s etc, but have just attempted a citizen 5430.  Nightmare.  My wife thought I had found religion as I spent so much time on my knees with my eyes to the floor looking for springs.  Got through that and found that the balance is shot.  Trying to source one or something that will fit from the citizen range has me totally perplexed.  Tried Ebay, Cousins etc without luck.  Any advice as to alternatives that will fit or alternative sources would be gratefully received.
    • Agreed, this is puzzling. Can you ask questions or inspect the lots before bidding? My Boley & Leinen Reform face plate is dia. 95mm exactly. It's possible that 4 inches is a slightly too large approximation, but why then make the distinction to 3 11/16 for the sake of 8mm? If the larger ones are truly 4" then they will clash with the bed, but then I have no idea which 8mm lathe would take them. All 8mm lathes have spindle height 50mm or less, as far as I know. The spindle height is, as you say, standard 50mm for W.W.
    • I have only been a member for six years & I have found this a very friendly forum although I don’t have anything to do with watches not because I don’t like watches but because I have gout in both hands so my dexterity isn’t very good, I restore torsion clocks & occasionally other antique clocks also at 72 my eyes are not what they used to be, that is why I only post on the clock forum & the lathe forum mostly . As others have said Mark it is much appreciated that  you are willing & able to do this. very many Thanks Dell
    • Ah, this is brilliant, thank you very much!
×
×
  • Create New...