Jump to content

Hello

jimbot
 Share

Recommended Posts

jimbot New Member

jimbot

Posted
Posted

Hello Ladies and Gentlemen,  thank you for accepting my membership. I have been a watchmaker for many years now, but you never stop learning. So I am hoping to pick up , and pass on those tips that we have learnt over the years. I am UK based and pretty much all of my work is Swiss based, so I will be questioning all the American watch experts.

oldhippy Distinguished Member

oldhippy

Posted
Posted

Thank you for your introduction and welcome to this friendly forum.

We all look forward to your contributions and continued involvement. 

If there is anything we can help you with don’t be afraid to ask. Nice clear photos can help a lot.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      About repair watch's jewel.

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England.  Photos please. 
    • RichardHarris123
      New forum member, new learner

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • caseback
      School Me Please: Sliding Mainspring Bridles

      By caseback · Posted

      This is the old/first(?) way for making a mainspring for an automatic. "Evolution-wise" it is an logical first step forward from a standard spring. Usually these are indeed replaced with a new spring with an integrated/fixed bridle. Lubrication as you would do with any automatic.
    • FabioBastardo
      Unknown watch movement logo. Very interesting

      By FabioBastardo · Posted

      Thank you. I was informed it was a cheap worthless Lack watch from India. It’s in a small mens watch looks to be around 1930 odd   Cleaned the movement and it’s going really well. Keeps good time.  This is a great site. Mystery solved. I’m obliged. 
    • RickTock
      School Me Please: Sliding Mainspring Bridles

      By RickTock · Posted

      I'm working on a Schild AS 1250 (a 'bumper' automatic) and it's the first time I've seen a mainspring like this. It has what looks like a regular manual-wind mainspring with a 'hook' at its outer extremity. On a manual-wind watch that 'hook' would engage with a 'hook' in the barrel wall to prevent it from rotating. However, the AS 1250's mainspring does not engage directly with the barrel but rather with a 'sliding bridle' that sits between the mainspring and the barrel wall, and evidently facilitates the slip necessary in an automatic. I'm not sure what advantage this two-piece configuration provides, but it highlights a gap (one of many) in my horological knowledge. I'm not sure if 'hook' is the correct term as used above, but please see photo below to see what I mean. Therefore, two questions please. 1. What is the proper way to lubricate a barrel from an automatic watch with a sliding bridle? My guess is the same as any automatic ms/barrel (e.g, a few dabs of braking grease on the interior barrel wall). What do the experts say? 2. I purchased a Generale Ressorts GR3472X mainspring, made for the AS 1250. It looks like the bridle is included and I don't need to salvage and re-use the old one. Is this a safe assumption? Thanks for the advice. If you have any other wisdom you'd like to share about separate sliding mainspring bridles, I would be very interested. Cheers!
×
×
  • Create New...