Jump to content

New Sherline lathe--first project

LittleWatchShop
 Share

Recommended Posts

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
Posted (edited)

I got a new Sherline--not to replace my WW lathes--but to complement them. I wanted something that could handle bigger stock as well as have access to many inexpensive accessories.

Had to make a mental leap from hand turning to cross slide turning. So far, I am having fun.

My first project is a WW tailstock runner that supports a 1/8" carbide bit. The first attempt was a fail. I got too aggressive and removed too much material. My second attempt appears to be a success. I only needed to remove about 300 um from this 1144 steel rod. Then drill a near perfect 1/8" hole. I turned the rod between a 3-jaw chuck and a live center. I may follow up with a set screw to hold the bit.

Stay tuned for other cool projects.

 

20250115_173836.jpg

Here is my Sherline setup

20250116_082618.jpg

Edited by LittleWatchShop
  • Like 5
SwissSeiko WRT Addict

SwissSeiko

Posted
Posted

I have a taig, which is the cheaper version of a sherline. I also made a tailstock runner. Its best to turn it between centers to get it concentric. As far as a set screw, I would go with a different approach, as any lateral input on the drill bit will shift it slightly and move it out of center. The best option is to turn a bunch of brass sockets for all the bits you have, turn a taper on the end that will go into the tailstock runner, and shellac the drill bit in the socket. Since you already have experience making a runner, you can make another one with an internal taper that matches the external taper you put on the brass sockets.

  • Like 1
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
5 hours ago, SwissSeiko said:

I have a taig, which is the cheaper version of a sherline. I also made a tailstock runner. Its best to turn it between centers to get it concentric. As far as a set screw, I would go with a different approach, as any lateral input on the drill bit will shift it slightly and move it out of center. The best option is to turn a bunch of brass sockets for all the bits you have, turn a taper on the end that will go into the tailstock runner, and shellac the drill bit in the socket. Since you already have experience making a runner, you can make another one with an internal taper that matches the external taper you put on the brass sockets.

Yes, I did turn on centers. The fit is near perfect. When removing the bit, a small vacuum is pulled and then, pop.

This was more of an experiment than addressing a need...so far

  • Like 1
SwissSeiko WRT Addict

SwissSeiko

Posted
Posted
On 1/24/2025 at 2:47 PM, LittleWatchShop said:

Yes, I did turn on centers. The fit is near perfect. When removing the bit, a small vacuum is pulled and then, pop.

This was more of an experiment than addressing a need...so far

So satisfying when it fit perfectly! I'm currently building a tool post holder for my flex tool, so I can mount a 3in grinding wheel to it to precision grind my tailstock runners. And also cut wheel teeth.

  • Like 1
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
12 minutes ago, SwissSeiko said:

So satisfying when it fit perfectly! I'm currently building a tool post holder for my flex tool, so I can mount a 3in grinding wheel to it to precision grind my tailstock runners. And also cut wheel teeth.

Would love to see pictures as you progress!!!

  • Like 1
SwissSeiko WRT Addict

SwissSeiko

Posted
Posted
16 minutes ago, LittleWatchShop said:

Would love to see pictures as you progress!!!

I will post them when I have it finished. Right now, I'm finishing up the lapping table setup for the lathe. Last night I got the lapping plates mounted to the lathe arbors. Just need to face them flat, and get the hardware for the pivoting table I made for the cross slide. Right now its all 3D printed, so I don't know how rigid it is going to be.

  • Like 1
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
4 minutes ago, SwissSeiko said:

I will post them when I have it finished. Right now, I'm finishing up the lapping table setup for the lathe. Last night I got the lapping plates mounted to the lathe arbors. Just need to face them flat, and get the hardware for the pivoting table I made for the cross slide. Right now its all 3D printed, so I don't know how rigid it is going to be.

I, too, print lots of 3D stuff for tools.  99% is PLA with a tiny bit of ABS when necessary.

SwissSeiko WRT Addict

SwissSeiko

Posted
Posted
5 minutes ago, LittleWatchShop said:

I, too, print lots of 3D stuff for tools.  99% is PLA with a tiny bit of ABS when necessary.

I struggle so much with ABS adhering to my bed, even with glue and brim hats. I use PETG for 90% of my prints, as its as easy as PLA, but more strong. I have a Bambu P1S

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
2 minutes ago, SwissSeiko said:

I struggle so much with ABS adhering to my bed, even with glue and brim hats. I use PETG for 90% of my prints, as its as easy as PLA, but more strong. I have a Bambu P1S

Still using my old original Lulzbot Mini from about 2018 or so.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mbwatch
      Automatic vs Manual movement servicing

      By mbwatch · Posted

      If at all possible, find a service guide for the automatic movements your work on, because the lubrication procedures may have different requirements or rely on oils you would not use in a manual wind train (in addition to the braking grease you mentioned). Some autos like older Seikos do not have a manual wind option, so the procedure of letting down the mainspring without being able to use the crown may require a screwdriver in the ratchet wheel screw and great care. Do you have an auto movement you were planning to start with?
    • LittleWatchShop
      Breitling Navitimer 806

      By LittleWatchShop · Posted

      I am an amateur, so there's that. I do not get fixated on amplitude, lift angles, and beat error. However, 4.8ms would bug me if it were my watch. But you must judge your own skills to appreciate the possibility of going backward. I suggest, that you button it up let your friend enjoy the watch for now. As your skills progress, come back to it and correct it. I assume that this watch has a fixed hairspring pin. Some modern watches have an adjustable pin along with adjustable regulator. These are trivial to get in beat. I own a valjoux 726 my dad gave me on my 18th birthday (a looooong time ago). I broke the ratchet wheel with an aggressive wind 4 yrs ago. I have been waiting for my skills to progress before doing a service. I am close. Your advice is well placed and I will apply it.
    • tonydagee
      Unitas 6376

      By tonydagee · Posted

      I didn’t find any anomaly to the left of the red mark…reflection? this is the balance in its pivot in the inverted assembly. i can’t see any obvious kinks  and the spring is flat as far as I can see. Either the stud screw is missing, or it’s glued in… I don’t know. I’m loathe to fiddle with it. Any further insights? Thanks!
    • Bonefixer
      Breitling Navitimer 806

      By Bonefixer · Posted

      Update!  I've dismantled it, cleaned all the glue off, and rebuilt and lubricated the base movement. I'll leave the chrono part for another day. It's running well - great amplitude and keeping time, but it's got a beat error of 4.8ms.    How important is it to correct this? I'm worried that the potential for making things worse having to take the hairspring off and on repeatedly to adjust this. Would anyone here accept it at that?
    • Neverenoughwatches
      Discussing the forum in the event of no administration

      By Neverenoughwatches · Posted

      Since I've been banned from the previous discussion, apparently my language was inappropriate...for small boys. I will start another thread and act in a more decent manner for the girls and ladies of the group.  Please what will happen if the forum can't be managed by the administrator, are there provisions in place to preserve the achived member's questions and answers over the years. Please if I may ask these important questions that are important to the members please.
×
×
  • Create New...