Jump to content

Recommended Posts

Posted (edited)

First is the Pogue I posted in the watch of today and the second is a Willard. The Pogue had bent/stuck pushers and a broken pivot on the minute recording wheel. I also had to reinstall the intermediate recording wheel bushing into the chrono plate, lucky I noticed it on the bench and tucked it away until I figured out where it was supposed to reside. Also had to source a crown and indicator ring spring.

20241223_133442~2.jpg

20241223_133433~2.jpg

20250122_221003~2.jpg

The Willard is a 6105-8119 from 1973. Was very dirty ( caked in grime) and not running. Cleaned the case and got it running. I am going to get a new crystal, but it is otherwise all original and not touched. The screws are perfect and no watchmakers marks.

DSCN6322~2.JPG

20250126_113151.jpg

20250125_150012.jpg

20250125_145901.jpg

 

Edited by Razz
  • Like 3
Posted
4 hours ago, Razz said:

First is the Pogue I posted in the watch of today and the second is a Willard. The Pogue had bent/stuck pushers and a broken pivot on the minute recording wheel. I also had to reinstall the intermediate recording wheel bushing into the chrono plate, lucky I noticed it on the bench and tucked it away until I figured out where it was supposed to reside. Also had to source a crown and indicator ring spring.

20241223_133442~2.jpg

20241223_133433~2.jpg

20250122_221003~2.jpg

The Willard is a 6105-8119 from 1973. Was very dirty ( caked in grime) and not running. Cleaned the case and got it running. I am going to get a new crystal, but it is otherwise all original and not touched. The screws are perfect and no watchmakers marks.

DSCN6322~2.JPG

20250126_113151.jpg

20250125_150012.jpg

20250125_145901.jpg

 

Beautiful 6105 there - that dial!

  • Like 1
Posted
5 hours ago, tIB said:

Beautiful 6105 there - that dial!

The Seiko badge and hands have corrosion, but otherwise the dial is pretty spectacular!

3.6 imprinted on the reverse means this is an original dial. 3D on the caseback

 

20250126_195001~2.jpg

  • Like 1
Posted
4 hours ago, Razz said:

The Seiko badge and hands have corrosion, but otherwise the dial is pretty spectacular!

3.6 imprinted on the reverse means this is an original dial. 3D on the caseback

 

20250126_195001~2.jpg

Yeah no doubt that's real - I discovered this weekend that they don't all have the datestamp funnily enough. 

 

Hand wise OG minute and hour hands are quite an easy find in my experience, seconds less so. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...