Jump to content

Recommended Posts

Posted
43 minutes ago, RichardHarris123 said:

Pidgeon? 

I expect a Yorkshire man to recognise this Richard, don’t you all have ferrets, whippets and pidgeons any more? 🤪🤣

 

Tom

  • Haha 2
Posted
26 minutes ago, RichardHarris123 said:

I was wondering what a pigeon clock was.

The military used carrier pigeons during the war to deliver messages, kind of like spy pigeons.  The bigger birds..they would strap clocks to those ones.... most often when the phone lines were down and folk couldn’t ring up for the speaking clock. 

The idea was to entice the bird down with a few seeds..get your time reading to set your watch and clock by...then send big bird on his way to help someone else. 

  • Haha 5
Posted
1 hour ago, RichardHarris123 said:

I was wondering what a pigeon clock was.

It is a clock used to time pigeon races to determine the winner. I think the birds were ringed prior to the start of the race the ring being removed and inserted into the clock recording the time of arrival in its home doocote.

 

Tom

  • Like 2
  • Thanks 1
Posted
38 minutes ago, RichardHarris123 said:

That makes sense, I  thought it must have a pigeon on the dial.  Hehe. 

I thought a cuckoo clock, but with a pigeon in the little door.

Posted

All right you fools pigeon clocks are used for racing pigeons. The only thing you have to worry about is cleaning out the pigeon shit. The same goes for Cuckoo clocks.  

  • Haha 3
Posted
2 minutes ago, oldhippy said:

All right you fools pigeon clocks are used for racing pigeons. The only thing you have to worry about is cleaning out the pigeon shit. The same goes for Cuckoo clocks.  

You're in fine form tonight OH. Hehe. 

Easier than cleaning up rocking horse s£%t.

  • Like 2
Posted (edited)
14 hours ago, tomh207 said:

It is a clock used to time pigeon races to determine the winner. I think the birds were ringed prior to the start of the race the ring being removed and inserted into the clock recording the time of arrival in its home doocote.

 

Tom

My father left me two of those. They come in nice wooden boxes and have a seal applied before a race. No pigeons on the dial. Do cuckoo's have rings (please don't go that way..  no really..).

"Fun" fact: you had to persuade the pigeons to come to you to get the ring. In some of these competitions, there was a lot of money involved. So much in fact, that owners have been known to shoot pigeons down in order to get the ring faster...

20250130_071529.jpg

20250130_071605.jpg

Edited by caseback
  • Like 2
Posted

Nearly every village had someone with racing pigeons, we have one here in St Combs. Top class birds were used for breeding and were well sought after or sold for big money. They have their own newspaper/ periodical They have international races from Europe and the owners don’t all wear flat caps and have whippets. Some of the bird lofts are cleaner than most houses and the birds pampered.  Special food stuffs to build up stamina A popular hobby at home and abroad.. Never raced any but have nursed exhausted stragglers back to health for return to their owners.

  • Like 2
Posted (edited)
On 1/29/2025 at 12:56 PM, RichardHarris123 said:

Pidgeon? 

if you mean the spelling, I just read that both pigeon and pidgeon are both correct.  Who knew.  Pigeon seems to be the commonly accepted norm these days, I stand corrected.  I'm not a fancier so its not a word I often use 🙂

I work with cryptography in cybersecurity as my main job.  Pigeon/pidgeon racing, and the timing of it, is an interesting use case to solve.  You need a shared accurate starting time, clocks to record the accurate finishing time, a method to identify the pigeon that's resistant to spoofing, and all in the hands of the participants who might have serious money in the game.  I know these days it's gone more high-tech with NFC timing devices and internet connectivity, but it's pretty cool how this was all done with mechanical clocks back in the day.

Edited by MikeEll
  • Like 3

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Ok, as per pictures I have a smiths rim set and wind on the bench, swimming in oil but all sorted. The fault I have is the mainspring bridle has lost its tab/notch/hook, like a hebdomas pocket watch the mainspring is fitted to a bridal in the barrel which slides around on full wind onto 4 notches in the barrel wall, thus stopping damage to the mainspring by over enthusiastic winding. So my questiion is this, what is the best way to create another hook in the bridal, my thoughts are along the same lines as making a new hole in the mainspring end, annealing etc, but what and how to make the hook?? I have a pair of barrel hook pliers that work great in soft brass but won’t even scratch the bridal, what I don’t want to do is whack a hole into it and not have a hook. the pictures are of the bridal ( broken) and a hebdomas ( complete ) incase you are wondering what I’m on about. And a few of the serivce. Thanks for any advise.
    • Decided to give the case and bracelet a good cleaning and my first shot at polishing/brushing. Went with the Cape Cod polishing cloth and gray scotch brite method.  Before First; Then After; Then comparing to some original links from when the watch was new to now.       
    • What is this (left of the red line)? hairspring? Frank
    • It's either bent or hung up on something or both. The hexane won't hurt it, and hanging from a balance tack indefinitely won't hurt it.   If the spring is glued to the stud there's a chance that the glue was softened and the outer coil stuck to the stud. Haven't seen that happen, but I suppose it could. Don't know if hexane affects the glue used either.
    • Hello all. some help required here from the community please. I serviced this movement, which was running reasonably well, but the balance spring which was running healthily before I started, after cleaning in hexane for 30 secs, is all bunched up at the stud. I did store the balalance on a tack thereafter for a day.   could the spring be strained under gravity? I demagnetised of course, and the balance is squeaky clean. some help would be much appreciated. Thanks, Tony G    
×
×
  • Create New...