what to press, to remove stem please :)

[Nickpan]

got a "KG Heuer" in a bag of bits, need to fix a crown on, but can't remove stem.  I've tried pressing a couple of bits, and there's no 'push labelled.  Anyone able to label the pic, or describe in words of one syllable!  

Thanks!

[RichardHarris123]

You might have to remove the automatic works to get to the release.

[Nickpan]

3 minutes ago, RichardHarris123 said:

You might have to remove the automatic works to get to the release.

oh bugger...

[AndyGSi]

I'd expect either of these 2 dimples to be the push to release.

Movement doesn't look the quality I'd expect from a Heuer as the pusher doesn't even line up?

[Nickpan]

6 minutes ago, AndyGSi said:

I'd expect either of these 2 dimples to be the push to release.

Movement doesn't look the quality I'd expect from a Heuer as the pusher doesn't even line up?

Read my post again - it's a KG Heuer!

[tomh207]

Can you tell us exactly what a kg Heuer is please? Heuer were high end until they got involved with TAG but even TAG movements don’t look like what you are showing us.

 

Tom

[Nickpan]

I bought a bag of watches for £50, this was in there, I'm assuming it has nothing to do with Tag Heuer, and I'm assuming it has very little value, but I'd quite like to see if I can fix it.

[tomh207]

13 minutes ago, Nickpan said:

I bought a bag of watches for £50, this was in there, I'm assuming it has nothing to do with Tag Heuer, and I'm assuming it has very little value, but I'd quite like to see if I can fix it.

In that context it is likely to be a fake utilising a Chinese movement hence the rougher than expected appearance for a heuer. 
 

have you tried the operation Andy suggested above yet?

 

Tom

[Nickpan]

yes, it worked!  I'd been avoiding the correct hole (as they say), as it seemed veeery near to a couple of cogs, but it worked a treat.  Stem had to be in the fully out position for it to pop out

 

 

Thanks all, a 5/5 thread   

[Nickpan]