Polarity switching module.

[Neverenoughwatches]

Hi watch people,  how's we all doin ?

Has anyone tried to set one of these up, the instructions are fairly poor. It's  just for forward and reversal of a simple motor with a time delay function.  I cant figure out if it has a pause setting  between the change of directions. Without it , it's quite an aggressive change. The instructions don't seem to mention a pause, but before I altered the run times I think it did have. Any help with this is appreciated. 

Edited March 11 by Neverenoughwatches

[HectorLooi]

Look at what I found.

[Neverenoughwatches]

18 minutes ago, HectorLooi said:

Look at what I found.

Thanks Hector thats about as far as I did get with the setting modes, but it verifies for me and as far as he knew that there is no pause feature between directions . Strange as I initially did see some pausing and restarting . Thanks Hector.

Another member mentioned these a few weeks ago, which is why i thought i would try one, can't remember who it was though.

Edited March 12 by Neverenoughwatches

[nevenbekriev]

Hi Rich,

The motor direction is switched by single relay. The power for the motor is not interrupted by the controller, it is directly delivered to the motor through relay contacts. The relay has only two states - on (forward) and off (reverse) This simply means no delay time. If You need delay, this means to use another relay (or may be transistor or generally some kind of controllable switch) to interrupt the motor power for the time of delay.

[Neverenoughwatches]

1 hour ago, nevenbekriev said:

Hi Rich,

The motor direction is switched by single relay. The power for the motor is not interrupted by the controller, it is directly delivered to the motor through relay contacts. The relay has only two states - on (forward) and off (reverse) This simply means no delay time. If You need delay, this means to use another relay (or may be transistor or generally some kind of controllable switch) to interrupt the motor power for the time of delay.

Thanks for the confirmation Nev.