Jump to content

Timex Camper T41711 Crystal

Tackleberry
 Share

Recommended Posts

Tackleberry New Member

Tackleberry

Posted
Posted

Hello everyone. I'm hoping someone here can help me source a crystal / lens for an old Timex Camper T41711. This isn't the old old mechanical one, but it's also not an Expedition version. It has a battery, not a mechanical wind. The day code is M9, which comes back to 2004, which is when I purchased it. It may cost more to repair it than it's worth, but it does have sentimental value. I purchased it right out of basic training, and I've had it for over 20 years now and the lens just fell out and I'm hoping it can be repaired. I pretty much wore it 75% of the time since I got it, and it's been with me through thick and thim and deployments. Any help is much appreciated. Thanks in advance.

Tackleberry New Member

Tackleberry

Posted
  • Author
Posted
11 hours ago, JerseyMo said:

is it like this one?

image.png

Yes, exactly. I've seen a few different versions, but mine has the blue water symbol, not white. 

 

17 hours ago, AndyGSi said:

Welcome to the forum.

Can you tell if it's Crystal or Acrylic.

I think it's Acrylic. The case is plastic so I would the is the lens would be too.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      About repair watch's jewel.

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England.  Photos please. 
    • RichardHarris123
      New forum member, new learner

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • caseback
      School Me Please: Sliding Mainspring Bridles

      By caseback · Posted

      This is the old/first(?) way for making a mainspring for an automatic. "Evolution-wise" it is an logical first step forward from a standard spring. Usually these are indeed replaced with a new spring with an integrated/fixed bridle. Lubrication as you would do with any automatic.
    • FabioBastardo
      Unknown watch movement logo. Very interesting

      By FabioBastardo · Posted

      Thank you. I was informed it was a cheap worthless Lack watch from India. It’s in a small mens watch looks to be around 1930 odd   Cleaned the movement and it’s going really well. Keeps good time.  This is a great site. Mystery solved. I’m obliged. 
    • RickTock
      School Me Please: Sliding Mainspring Bridles

      By RickTock · Posted

      I'm working on a Schild AS 1250 (a 'bumper' automatic) and it's the first time I've seen a mainspring like this. It has what looks like a regular manual-wind mainspring with a 'hook' at its outer extremity. On a manual-wind watch that 'hook' would engage with a 'hook' in the barrel wall to prevent it from rotating. However, the AS 1250's mainspring does not engage directly with the barrel but rather with a 'sliding bridle' that sits between the mainspring and the barrel wall, and evidently facilitates the slip necessary in an automatic. I'm not sure what advantage this two-piece configuration provides, but it highlights a gap (one of many) in my horological knowledge. I'm not sure if 'hook' is the correct term as used above, but please see photo below to see what I mean. Therefore, two questions please. 1. What is the proper way to lubricate a barrel from an automatic watch with a sliding bridle? My guess is the same as any automatic ms/barrel (e.g, a few dabs of braking grease on the interior barrel wall). What do the experts say? 2. I purchased a Generale Ressorts GR3472X mainspring, made for the AS 1250. It looks like the bridle is included and I don't need to salvage and re-use the old one. Is this a safe assumption? Thanks for the advice. If you have any other wisdom you'd like to share about separate sliding mainspring bridles, I would be very interested. Cheers!
×
×
  • Create New...