Jump to content

Elgin Pocket Watch Mystery Screw.

Keitharoo
 Share

Recommended Posts

Keitharoo Member

Keitharoo

Posted
Posted

I am new to watch repair, but have successfully repaired, cleaned and oiled several pocket watches.  This picture is from an Elgin pocket watch that I am currently working on.  The piece indicated by the arrow, obviously assists in toggling between winding and setting via the clutch pinion but, as you can see, there is no screw in the hub to hold it in place.  However, in the bridge, above the piece indicated, is a small screw in a threaded through-hole that is not retaining any other pieces and, at first glance, appeared to be doing nothing.  I assume it is there to somehow retain the piece shown, and possibly adjust the resistance/tension of that piece.  I've haven't seen one like this yet.  What exactly is the mystery screw supposed to be doing, and how do I adjust it to do so?     post-1801-0-20526400-1457103006_thumb.jp

Keitharoo Member

Keitharoo

Posted
  • Author
Posted

Thanks, I'll try the oil trick.  Still really makes me curious, though.  why would they put a screw that seems to be doing nothing into that bridge?  Weird.

  • 4 weeks later...
Keitharoo Member

Keitharoo

Posted
  • Author
Posted

Using a little tiny bit of oil to hold the piece in place worked great!  Thanks for the wonderful advice.  Also, I think I solved the mystery of the real purpose of that screw that appears to be doing nothing.  It seems to be there to hold that piece locked so that there is no tension on the tail piece in order to allow the stem to be inserted without spring pressure on it.  After I screwed the bridge into place, I rotated the wind/set mechanism to take tension off the stem, then snugged the mystery screw down just enough so that nothing moved.  After the stem was in, I backed the mystery screw off, the tail piece engaged, and the wind/set mechanism snapped itself into place.  Wow, a screw that seems to be doing nothing sure was confusing for a beginner.

  • Like 1
  • 4 years later...
lakeradio6 Member

lakeradio6

Posted
Posted
On 3/4/2016 at 9:52 AM, Keitharoo said:

I am new to watch repair, but have successfully repaired, cleaned and oiled several pocket watches.  This picture is from an Elgin pocket watch that I am currently working on.  The piece indicated by the arrow, obviously assists in toggling between winding and setting via the clutch pinion but, as you can see, there is no screw in the hub to hold it in place.  However, in the bridge, above the piece indicated, is a small screw in a threaded through-hole that is not retaining any other pieces and, at first glance, appeared to be doing nothing.  I assume it is there to somehow retain the piece shown, and possibly adjust the resistance/tension of that piece.  I've haven't seen one like this yet.  What exactly is the mystery screw supposed to be doing, and how do I adjust it to do so?     post-1801-0-20526400-1457103006_thumb.jp

I put one of these together today. A 1907  elgin. The bridge above holds this part in.

 Share
Go to topic listing

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Ad Free WRT

      By Neverenoughwatches · Posted

      Thanks Mark, but can we still discuss the other important matter please and not be distracted from it. Thank you.
    • JohnR725
      Who's doing what in the world of watches today.

      By JohnR725 · Posted

      You're probably not going to see a dramatic change but you should probably figure out what the lift angle is as it probably is not 52°
    • Mark
      Patreon Free WRT

      By Mark · Posted

      In tandem with my last post regarding the removal of Google Adsense on this website - I have also decided to fully self fund this site as a gift to the watch repair community of which I’ve been a member of, and have benefited from since being extremely lucky to gain an apprenticeship back in the late 80s.    Well, that means that I have also closed down my Patreon account - or, to be clear, stopped all future transactions on my Patreon account and this is with immediate and permanent effect.    not to mention, but I will, I really really do appreciate the contribution all my patreon and PayPal supporters have provided over the years, you guys have been absolutely awesome and helped to keep this forum alive and available for those who might not be able to afford the payments.    again, from the bottom of my heart thank you.     
    • Mark
      Ad Free WRT

      By Mark · Posted

      My pleasure. I would rather pay more than have those annoying ads ruin this site. They were a terrible idea and something I never even saw much, but I was on my iPad yesterday testing a security update for the forum software and it was impossible. I decided then - they had to go!!! Also, co-incided with this, for those who are paying for pattern in order to help fund this site - I’ve just disabled patreon. Future monthly payments will not be taken.  PayPal is a little more complicated. I will try to work out how to cancel the few subscriptions but if you are a PayPal donator then please feel free to cancel the monthly sub.  I will, however thank you all from the bottom of my heart for helping to contribute to this site financially - it means a lot. But going forward, I’m funding it personally from my pocket and that’s the end of it 😄
    • JohnR725
      Ad Free WRT

      By JohnR725 · Posted

      Thank you Mark it definitely makes the site looked much nicer. Although I didn't mind the ads as long as it helped to pay for the messageboard but sometimes when you had the feeling that there were more ads than message board yes it was a little annoying. Thank you
×
×
  • Create New...