Jump to content

Landeron Chronograph with aftermarket dial - redial?

GeorgeClarkson
 Share

Recommended Posts

GeorgeClarkson Super WRT Addict

GeorgeClarkson

Posted
Posted (edited)

Since June 8th will be my B-Day, and if all goes well I will also become father for the first time (well, that will probably NOT happen on the same day, but I can still wish, can't I?) I decided to pull the trigger on a watch I liked on eBay.

The only issue is that I did so, while surfing the site with my mobile phone, so the pictures were rather small...

Are you starting to get the picture of the issue, here?

Fact is, that after analyzing the seller pics on my PC, I started noticing "strange" things... I will leave the pics talk for themselves... The movement looks ok, as does the case, the permanent seconds hand and minute counter are detached from their pinions, but that was declared in the auction, so no issue.

The issue is that the dial markings appear not to match. Check the tachymeter marking for "60" which logically should be directly over and properly aligned with the 12 hour marking. Is it the picture angle that plays tricks on my eyes, or is it a bit shifted to the right??

I have not received the watch yet, so a personal inspection is yet to be made. Could eventually this be a reason to give the watch back? No mentio on a redial on the auction text... 

What do you experts think?

$_57 (4).JPG

$_57 (5).JPG

$_57 (10).JPG

$_57 (2).JPG

$_57 (3).JPG

$_57 (6).JPG

$_57 (8).JPG

Edited by GeorgeClarkson
Link to comment
Share on other sites
frenchie Distinguished Member

frenchie

Posted
Posted

A few things I see that are a bit strange:

- No brand name

- It doesn't say swiss made anywhere

- On the small dial to the left, you can clearly see that the "45" markers aren't aligned

- Strange markings on the outer section of the dial at the 12 o'clock, 1 o'clock and between 2 and 3 o'clock positions

  • Like 1
Link to comment
Share on other sites
ramrod Super WRT Addict

ramrod

Posted
Posted

interesting. have you compared it to other ebay pics? i'd be curious to see what you find.

yeah - no "swiss made" on it is the first thing i noticed. another thing - the crystal bezel seems to be in remarkeable condition compared to the rest of the case. there's no schmutz on it where it meets the crystal. on the other hand, there is a bit of schmutz on the pushers and crown. could it be a replacement crystal? they might have cleaned up the bezel when they replaced it.

if it is a redial, they did a great job with the patina, but fell short on marking placement. that "12" and "60" misalignment is odd indeed.

frenchie - are the "45"s supposed to line up?

 

oh - and congratulations on fatherhood. there's nothing like that euphoria. and it doesn't go away.

  • Like 1
Link to comment
Share on other sites
GeorgeClarkson Super WRT Addict

GeorgeClarkson

Posted
  • Author
Posted
52 minutes ago, frenchie said:

A few things I see that are a bit strange:

- No brand name

- It doesn't say swiss made anywhere

- On the small dial to the left, you can clearly see that the "45" markers aren't aligned

- Strange markings on the outer section of the dial at the 12 o'clock, 1 o'clock and between 2 and 3 o'clock positions

13 minutes ago, ramrod said:

interesting. have you compared it to other ebay pics? i'd be curious to see what you find.

yeah - no "swiss made" on it is the first thing i noticed. another thing - the crystal bezel seems to be in remarkeable condition compared to the rest of the case. there's no schmutz on it where it meets the crystal. on the other hand, there is a bit of schmutz on the pushers and crown. could it be a replacement crystal? they might have cleaned up the bezel when they replaced it.

if it is a redial, they did a great job with the patina, but fell short on marking placement. that "12" and "60" misalignment is odd indeed.

frenchie - are the "45"s supposed to line up?

 

oh - and congratulations on fatherhood. there's nothing like that euphoria. and it doesn't go away.

Spot on Frenchie on what I noticed too

Ramrod, thanks for the congrats, I am sure this is one thing I will never forget... :)

As per the Patina, actually I believe this is a common dial with normal patina, to which the misaligned markings were applied to make it more interesting.

Whatever the right answer might be, I have some original dials here with me, so it actually does not make any difference. The important thing is that the movement is intact and working well as decribed in the auction and that I can easily replace the dial with an original one (I won't resell the watch, it is for my personal use).

 

Link to comment
Share on other sites
frenchie Distinguished Member

frenchie

Posted
Posted
1 hour ago, ramrod said:

frenchie - are the "45"s supposed to line up?

Pretty sure...

 

Some links to pictures from a quick google image search:

219-700x400.jpg

 

14dabad2d8dfe075409c4831ccd8805db.jpg

 

One other thing I noticed: you have the 2 and 7 numbers, but not the 4 or the 10, which makes the dial not symmetrical. Should it be something like this??

 163273400_-two-registers-three-color-dia

 

Finally, a link to an ebay listing (not mine, informational only): http://www.ebay.com/itm/Vintage-HYDEPARK-Military-Chronograph-Landeron-48-All-Original-Watch-L8-/371421599832?hash=item567a73d858:g:7QwAAOSwPcVVy26f

 

IMO, all things considered, it's really nitpicking ;) As long as you're happy with it, it will look good on your wrist I'm sure !

Link to comment
Share on other sites
GeorgeClarkson Super WRT Addict

GeorgeClarkson

Posted
  • Author
Posted

The more I look at the pictures, the more I think it is a redial, and a quite badly made one at that. But nevertheless, I will check it out when it arrives, and if it does look too quirky, I will replace the dial with an original one.

@frenchie: you are right, this is not the first landeron-based chrono I have, and all the ones I possess have the same layout as the ones in the pics you posted.

Attachd a pic of my HEMA Chronograph with Landeron 248 movement that I am wearng at the moment, and my Walker Chrono, also based on a L.248 (pic taken while servicing it).

1.jpg

landeron248_1.jpg

Link to comment
Share on other sites
GeorgeClarkson Super WRT Addict

GeorgeClarkson

Posted
  • Author
Posted
5 hours ago, bobm12 said:

Congratulations on your new baby, Geoge! Is the new watch for him/her? You are getting ahead of yourself!! :D

Cheers,

Bob

It will be a Priincess, so "her".... and no, the watch is for me :P I already prepared something special for her, that I will only show when she'll be old enough to wear it.... ;)

  • Like 1
Link to comment
Share on other sites
  • 4 weeks later...
GeorgeClarkson Super WRT Addict

GeorgeClarkson

Posted
  • Author
Posted (edited)

And all our fears were correct.... it must be a redial, and a pretty bad one too....

P1010022.JPG

 

Either a redial, or the blue tachymeter scale was applied on a second moment... but please also note from the picture above that the chronograph minute dial hhole, on the right, is not perfectly round, but somewhat oval: it was milled through to better center the minute pinion, which makes me think this dial does not belong at all to this movement, but was later adapted.

Your thoughts?

Edited by GeorgeClarkson
Link to comment
Share on other sites
  • 2 weeks later...
RyMoeller Super WRT Addict

RyMoeller

Posted
Posted

This is fascinating.  I always wonder what the thinking was behind actions like that.  A Landeron 248 isn't too uncommon I don't think so it seems strange that so much work would go into making the wrong dial work as opposed to just finding the right one.  On the other hand, it's just these kind of things that get me excited about watch restoration.  It's no fun if the watch you started with didn't have gremlins inside!

Congrats on fatherhood by the way.  I have two princesses of my own.  They're the best thing to ever happen to me.  :)

Link to comment
Share on other sites
GeorgeClarkson Super WRT Addict

GeorgeClarkson

Posted
  • Author
Posted
10 hours ago, RyMoeller said:

This is fascinating.  I always wonder what the thinking was behind actions like that.  A Landeron 248 isn't too uncommon I don't think so it seems strange that so much work would go into making the wrong dial work as opposed to just finding the right one.  On the other hand, it's just these kind of things that get me excited about watch restoration.  It's no fun if the watch you started with didn't have gremlins inside!

Congrats on fatherhood by the way.  I have two princesses of my own.  They're the best thing to ever happen to me.  :)

Hi RyMoeller and thanks for the congrats on my fatherhood, I still cannot wrap my head around it....

As per the thoughts behind a dodgy work like the one done on my watch, I honestly believe that it was a matter of laziness after all. The guy probably had a movement, a case and a dial, wanted to "bake" himself a working watch (probably to sell for a small profit on eBay - which he did btw) and didn't care if the pieces all fit properly together... He probably hoped the new owner didn't know/care/notice the incongruence.

We both got what we wanted, though: he got a bit of money, I got a working movement, a case and a dial to remind me how things "should not be done". I bought this watch actually for the spares.... so no real harm.

  • Like 1
Link to comment
Share on other sites
  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ChrisInOz
      No images showing

      By ChrisInOz · Posted

      The post below contains the link. If you don't already have a discord account it will take you to the registration screen.  Registration is free.   https://www.watchrepairtalk.com/topic/31653-mark/?do=findComment&comment=279066
    • luiazazrambo
      WWW Eterna sucked me in.

      By luiazazrambo · Posted

      HWGIKE#57 Valex FEF 190 15 jewels Swiss lever full service and repair This one was waiting for a balance staff replacement in my cabinet parts and case cleaned up with a new balance staff and a 4th wheel as the original 4th wheel had a broken pivot for the off center second hand. I never attempted a balance staff replacement before however I received a Bergeon Molfres (i was hunting it for about 2 years) and with the help of it I managed to remove the old staff and riveted the new one in. It also received a new MS, crystal and the hole for the MS arbor was also tightened. With the new MS now it has an acceptable performance meaning that the amplitude goes up to 280 fully wound, has an acceptable beat error and I have the two nice lines but only dial up, dial down is not as nice and I could not figure out as why. I have the two lines but the amplitude is dropping to around 230 and the lines are a bit hairy. Both dial up and dial down the lines just go up and down without seemingly any pattern. I cleaned the movement two times, and then a 3rd time pegged out the main plate and train bridge holes but made no change. Both the HS collet and the roller table was too lose on the new staff... I did not count how many times I took the balance cock off to sort out the HS collet, the roller table and the beat error, somebody before me also shortened the HS by pushing it out a bit and it seems every time somebody is messing with the end of the HS the protruding bit is most of the time twisted bent etc. This one was probably one of the most challenging repair and service. I might take the new MS out and clean it lubricate it as I just pushed the new one in to the barrel from the retaining ring. Plus started to re-read the theory of the escapement and how to analyse the graph on the timing machine: Greiner Chronografic Record manual. I am also thinking to put the watch on a 24 hour long run with the eTimer SW it once helped me to figure out what was wrong with a watch. There is an interesting part of the Greiner record manual talking about the pallets and the end shake of the balance and pallet staff. Maybe this is my issue? Who could that possibly identify? After a few years now I am still without a clue how could watchmakers make parts I can only see with my microscope or how could/can they carry out complicated services impossible to do.. real magic..... .... ..... before I sent this post while the pics were uploading I had an idea, i was browsing the possible outcomes on the timing machine I had one for magnetism..... so I demagnetized the movement and it is not hairy now.... two really nice lines 0.2 ms beat error still a bit wavy, but a lot lot better..... argh....  
    • Nucejoe
      Hello from Cypress, CA

      By Nucejoe · Posted

      Hi there, welcome here.  
    • JohnR725
      No images showing

      By JohnR725 · Posted

      yes the advertising revenue should generate money. The question is how much money? Then as far as the cost of the website goes that's relatively easy to determine? all you would have to do to grasp costs and profitability would be to go to the link below and you can actually get a website for free try it out for free I believe you get no advertising initially. They also talk about that they'll help you out they have marketing tools and some sort of paid subscription or something. So I guess were shopping for a whatever just ask them what would a maybe could use this one as an example in other words it's going to look basically identical to this is going to have advertising a paid subscriptions what's it going to cost? After all they want to sell or give us a message board like this they should bill answer the questions as they're the people who did the software for this. Yes they really said you can have a free discussion group at least to start. https://invisioncommunity.com/ I was curious about the monthly supporter thing where exactly do we find that on this message board? A quick search I'm not finding it so obviously I'm not looking in the right place?
    • Curare
      No images showing

      By Curare · Posted

      Help me out here, but with all the advertising on this site (which I don't mind) wouldn't it pay for itself or even make money for the owner ???
×
×
  • Create New...