Jump to content

BTM - Boley lathe compatability

Tmuir

By Tmuir
in Tools & Equipment

 Share

Recommended Posts

Tmuir Distinguished Member

Tmuir

Posted
Posted

I have a BTM lathe and it is meant to be a copy of the pre war Boley lathes.

I know the BTM has the same spindle bore of 8mm as the Boley lathe, but was wondering just how compatable the two lathes are.

Will Boley collets fit the BTM?

 Also are the bed size the same, so if I find a Boley attachment for the bed that has the flat on the top, not the side will it fit the BTM?

 

Thanks

Tony

Tmuir Distinguished Member

Tmuir

Posted
  • Author
Posted

Thanks for that, that's really helpful, now I can safely look at items to buy.

Didn't want to spend a small fortune for an accessory and not have it fit my lathe.

clockboy Distinguished Member

clockboy

Posted
Posted

I purchased a lot of my collets at watch fairs. Just take collet spindle ( sorry can not remember its correct name) to test if the collets fit


Sent from my iPhone using Tapatalk

Tmuir Distinguished Member

Tmuir

Posted
  • Author
Posted

In Perth Western Australia we are not so lucky to have things as watch fairs, the closest we have are antique fairs, which you would have to be very lucky to find watch maker tools at, but the watch guild I am now a member of attends the biggest one in Perth, not really to sell anything, although they may have a couple of items for sale, more to let people know that qualified watch and clock repairers still do exist.

I have picked up a few items via the watch repair school I attend, but if I am not buying new most of my tools come from online auction websites so I don't get a chance  to see before I buy

clockboy Distinguished Member

clockboy

Posted
Posted

OK by the way remembered the the name now it is the "draw bar".  By using the chart I attached to can still find them on the bay. I have purchased this way. One thing I have found you never have enough collets.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Mark
      Ad Free WRT

      By Mark · Posted

      Of course it will continue Richard.
    • Rixy
      Help with Hermle ships clock

      By Rixy · Posted

      I have stripped and cleaned a Hermle ships clock. It was just oily, no major faults, and I reassembled it, following my photos in reverse order. The time train is fine but the strike train will not play the ships bell strike for half-past. Ships bells play a four hour sequence for the 'watches' and play double 'ding' for the hour and the double dings plus one for the half past (eg half past the second hour is 'ding-ding' 'ding-ding' 'ding'). Sounds complicated but it isn't really. The strike wheel consists of pairs of bumps (for the ding-ding) and no single bumps. There must me some mechanism on the half-past that lifts the strike lever over one of the bumps so only one ding is played. When I get to a half past, it still plays double ding. I have a feeling it is to do with the lever in front of the rack (there is a sprung attachment  on it) and the position of the wheel (to the right) with the two pins that lets that lever fall, but no matter where I place that wheel I cannot get a single ding at half past! Please can someone help with advice on positioning so I can fix this? BTW Happy Easter 🐣 
    • mbwatch
      Who's doing what in the world of watches today.

      By mbwatch · Posted

      No it's not 52. I had looked at the Pocket Watch lift angles thread, which lists Elgin 6s as something really high like 62° but visually that is not at all what this watch is doing. I think 42° is more correct and that's where my machine is setup. The watch has a million problems but I have made solid progress. Impulse jewel replaced. Hairspring didn't match the balance (which also doesn't match the serial) but I got it down into range this weekend with 8 or 10 huge timing washers. Replaced the mainspring, balance and train are nice and free. At this point it is running consistently and in beat at about 160°, the third wheel has a bend that sends the timegrapher on a little roller coaster every 8 minutes or so. Remaining amplitude problems may be down to the escapement. The banking pins were way out and it didn't run at all before I started. It has one of the old brass escape wheels rather than steel, and I assume the faces its teeth are probably worn or scored in a way I can't yet fix (or see without a microscope). I know this watch is not going to run above 250° but I am going to keep trying to get above 200. But the best part about this watch? Some unscrupulous person stamped "21 JEWELS" on the train bridge sometime in the past, right on top of the Damascening. It's a 15 jewel movement.
    • tomh207
      Smiths rim wind and set

      By tomh207 · Posted

      I think it would rather be the blast of high current drain that would do the damage. But if used occasionally to maybe fix a mainspring or do dial feet it might be worth trying especially if the mainspring or a replacement couldn’t be found.    Tom
    • RichardHarris123
      Ad Free WRT

      By RichardHarris123 · Posted

      This is indeed a unique site and members including myself genuinely care about it.  All we want is the site to continue. 
×
×
  • Create New...