Jump to content

Silly Error But Funny (In The End)

clockboy
 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

I thought I would share this funny.

I was given one of those jobs that you just know are trouble. My next door neighbour asked if I could look at her watch as the glass had fallen off ! ! !  The watch was a really cheap Rotary and the glass and frame for the glass just snaps on just like a snap on case back.

On close inspection it looks as though it also had some sort of sticky glue around the rim to help adhesion.

As a test I snapped the glass back on using a glass press and sure enough it snapped on a treat. HOWEVER I could not believe my eyes some of the roman numerals had dislodged with the snap action. After running put of swear words I re-stuck the offending numerals with epoxy glue and a pin. When dry I used double sided tape (borrowed from the wife's craft room)  Snapped the glass back on and I thought the jobs a good Un.

 

HOWEVER I had stuck the eleven (XI) upside down  i.e. (IX) this watch now has two 9,s.

What a plonker you might say. Fortunately the neighbour thought it very funny and believe it or not is very happy with the repair.

No fee charged for this one.

  • Like 1
WillFly Distinguished Member

WillFly

Posted
Posted

Two 9s - excellent! This means that, if you do something silly at the first 9 o'clock, you'll be able to put it right by the next 9 o'clock.

 

Back to the future indeed! :lol:

  • Like 2
atimegoneby Super WRT Addict

atimegoneby

Posted
Posted

 

 

HOWEVER I had stuck the eleven (XI) upside down  i.e. (IX) this watch now has two 9,s.

 

 

 

Does that mean you can go to bed at 11 o'clock and still say you had an early night !   :sleep:

 

            :D

clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

YEP

What little experience I have had the cheaper the movement either clocks or watches the more potential problems

i.e. Timex watches has anyone successfully got the plates apart.I gave up with one a while ago.

autowind Distinguished Member

autowind

Posted
Posted

We are all allowed a few errors or as I call them brain farts, but it all ended well in the end.

 

Re Timex watches, the mechanical Timex is a very clever design and is as rugged as a Tiger tank, but I think it was meant as a throw away item and as such is not designed to be serviced like a Swiss watch.  I think the idea is to remove the dial and dunk the whole watch in the cleaning machine, dry it and then oil the usual bits and pieces.  They are not really worth expending any effort on as even after spending several hours on it all you end up with is a cheap watch.  OK if it's for your own amusement, but not viable for a business.

clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

We are all allowed a few errors or as I call them brain farts, but it all ended well in the end.

 

Re Timex watches, the mechanical Timex is a very clever design and is as rugged as a Tiger tank, but I think it was meant as a throw away item and as such is not designed to be serviced like a Swiss watch.  I think the idea is to remove the dial and dunk the whole watch in the cleaning machine, dry it and then oil the usual bits and pieces.  They are not really worth expending any effort on as even after spending several hours on it all you end up with is a cheap watch.  OK if it's for your own amusement, but not viable for a business.

Thanks I came to the same conclusion. I did this to an old cheap alarm clock a few years ago just to see the results and it runs a treat in fact I still use it if we have a weekend away. It does make you think sometimes.

Geo Distinguished Member

Geo

Posted
Posted

Two 9s - excellent! Back to the future indeed! :lol:

More like back to the drawing board! :-)

  • 8 months later...
clockwatcher WRT Addict

clockwatcher

Posted
Posted

CB, I know this is an older thread but I've come across it as I work my way through the threads and posts.

 

Seeing your post about having two IXs on your neighbour's watch face reminded me of a watch that I bought new (most unusual) five or six years ago.

 

I'd gone to stay with a friend and had forgotten to take my watch with me. Feeling in need of something to hang on my wrist, I went into an emporium and looked at a caseful of budget watches. Having chosen one on the basis that it looked nice and chunky and the fact that I'd recently bought a Jeep Cherokee I handed over the money, about £20, and thought no more about it.

 

 It was only after having worn it for about a week that I noticed what you've all noticed straight away. Yep, two 12s!!

 

The watch kept and, as my daily wearer, still keeps excellent time so I was very pleased with it.The movement is a Miyota 6M53 quartz, which has been reliable and accurate. A great £20 worth.

post-742-0-97003400-1426250162_thumb.jpg

clockboy Distinguished Member

clockboy

Posted
  • Author
Posted (edited)

Yep one of my classics & never allowed to forget.  It,s my neighbour's never ending party questions "spot what,s wrong with my watch"

 

Just an old duffer born in MCMLII making a cock up because it was roman numerals, yours however is a real howler.

Edited by clockboy
clockwatcher WRT Addict

clockwatcher

Posted
Posted

Maybe if, like me, you'd been born in MCMXLIX you'd have twigged earlier. :-)

Not knowing how mass-produced dials are made I'm at a loss as to how my 'double-12' came about. Maybe they ran out of zeroes or it was Friday afternoon or something?

As you say, it's a talking point. I occasionally ask people if they can see what's unique about my watch and often it takes a while to 'clock' it. It raises a question in my mind about how we read analogue and digital watches. With analogue the hand position is everything so maybe the dial digits are 'invisible'.

bobm12 Distinguished Member

bobm12

Posted
Posted

Nice watch clockwatcher, probably a Monday morning more than a Friday evening but it rocks!

 

Cheers,

 

Bob

  • Like 1
clockwatcher WRT Addict

clockwatcher

Posted
Posted

Nice find Geo! I wouldn't mind a J-12 as I love retro and was very fond of my Cherokee. Unfortunately I wrote it off, along with a section of Armco, on the A3 in Surrey.

Profundus Member

Profundus

Posted
Posted

Awesome....if it makes you feel better, I've just added a post in the repair section before I'd read this.....I've had a cerebrally challenged day too! :)

Michael WRT Addict

Michael

Posted
Posted

I found this copy Omega in a bundle of spares & repairs I bought of ebay. Not quite grasped the spelling of Speedmaster

post-143-0-97995300-1426627218_thumb.jpg

 

 

The movement and case were OK, so I bought a new strap off ebay and made a new dial, and now happy to wear.

 

post-143-0-81079400-1426627322.jpg

  • Like 2
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Randy55
      Hour hand won’t go past certain spot when adjusting time forwards

      By Randy55 · Posted

      Keevo, Welcome to the group ! I'm thinking that you have some damage to the hour, and/ or minute wheel. Possibly just a bent, otherwise damaged, or missing tooth.   Your photo didn't post that I can see. I think you'll have to open it to start really finding the issue. Best, Randy
    • Neverenoughwatches
      Diy rotary cleaning machine

      By Neverenoughwatches · Posted

      An industrial break cleaner , like Holts does a good job of rinsing off paraffin 
    • mikepilk
      Cap jewel with what looks like a circular engraving around the edge

      By mikepilk · Posted

      In cap jewels on several watches I have serviced over the years. I've recently serviced a couple of Longines movements where the cap jewels were colourless. They are a real pain. Without colour they disappear when immersed in any liquid for cleaning 😲 Not necessarily. Cousins do a 10ml bottle for £26 which will last me for years. That's just half the price of a simple Bergeon silicone cushion, so not too expensive 🤣
    • BobG
      Etachron regulation system

      By BobG · Posted

      I wanted to post an update as I have two movements running really well now, 230-250 amplitude , 0.5 and under beat error, and +/-8 seconds or so. I removed the hairspring assembly in order to start over and noticed that the terminal curve between the stud and regulator arm was distorted. The stud was lower than it should be. I massaged the curve to look pretty good and reinstalled it. I followed Alex's video advice, best I could with 10x magnification, and with the regulator arm set in the middle of the curve I adjusted the stud so the spring was centered. I then made sure I could move the regulator arm the entire terminal curve without upsetting the coils. I then put it back on the Timegrapher and began closing down the regulator pins until I saw a change in amplitude which means to me that the pins were now pinching the spring. I opened them slightly and it looks good except I have a 0 on dial down, +3 on dial up but -16 on crown down.  I'm a bit stuck on how to adjust out the positional error. I also noticed a drop in amplitude, 180-200 on crown down. In the other video link I posted at about minute 26 if I remember he adjusts out positional error by manipulating  the regulator pin gap. With crown down the hairspring falls away from the pin and the rate slows so he closes the pins a bit to keep them tighter in crown down position. That means the spring is tighter on dial up as well but then he moved the regulator arm to slow the movement.  There must be some Seiko experts here that have some methods for dialing out positional errors. 
    • rjenkinsgb
      Short bead springbars

      By rjenkinsgb · Posted

      Like these? https://www.watch-tools.de/metal-straps/springbars/assortment-360-strong-spring-bars-beco-inox-o-1-8mm.php  
×
×
  • Create New...