Jump to content

Time To Retrain

Lawson
 Share

Recommended Posts

Lawson Super WRT Addict

Lawson

Posted
Posted

Hi Guys,

 

Just introducing myself and giving you guys some background on how I came to this forum.

 

I've been in the IT Industry since 1992. Unfortunately, IT positions are rapidly being outsourced to places like India and Malaysia, and this will only increase exponentially in the next few years. 

 

My last position was made redundant after being employed by them for many years.  Even though I received high merits on my monthly reports; there simply was no positions being retained ... it all went overseas to Malaysia.  Because of my skills, I was one of the last people to be made redundant, and having to train foreign workers to replace my friends at work, and eventually myself, not only left a bad taste in my mouth, but was also a huge wake-up call that IT Tech Support is finished in my country.
 
So, I am dedicating myself to learn about watch repair in the hope of being indentured as a apprentice: and retrain into a new career path with a future.
 

I know it is a hard occupation to get into (especially at my age), but I'm a hard worker and determined to succeed.  I want to learn as much as possible to have an edge over other being interviewed for the few positions being offered.  I would appreciate information on study material that you guys recommend ... books and apprentice training course material that I can purchase to further my own personal advancement,  until I get that job offer.

Blacklab Distinguished Member

Blacklab

Posted
Posted

Welcome & good luck in your new career. Its good to change tack, 6 years ago I owned a rapidly declining print business in London, luckily I managed to sell it off and since then have worked as a self employed handyman. I now look forward to getting up on Mondays, work is varied, the order book is full.

autowind Distinguished Member

autowind

Posted
Posted

Welcome to the forums Lawson,  it's difficult to think of a safe job these days,  undertaker, springs to mind, Dr's, dentists or best of the lot a Banker.

 

The best advice I know is to download and read this book  http://dump.petervanwezel.nl/Practical_Watch_Repairing.pdf  if you read all of it you will have a very good understanding of mechanical watches.  Next step would be to get hold of some scrap movements that you can practice on, there is usually something on Ebay or try friends.  When you can take them apart and put them back together you will have reached a milestone.  Also watch Marks videos on YouTube to see an expert at work. Hope this helps.

Lawson Super WRT Addict

Lawson

Posted
  • Author
Posted

Thanks for the warm welcome :)

 

Autowind: Thanks for the book advise mate.  I did a bit of a search on this forum last night and spotted that book being recommend (I think the first book Mark ever purchased on watch repair) ... so I ordered an old hardcover copy of fleabay.  I'll be reading that cover to cover to be sure.

 

As for old movements, do you have any recommendation on which is the best cal. and/or brand of movement to start practicing on?  I don't wanna try running before I've even crawl outta the crib :P  Cause from what I've researched so far, there are brands\cal, of movements that are a real bugger to work with (poor design and build, and other far better and much more forgiving to a novice like me.

southwesttimers Member

southwesttimers

Posted
Posted

Hi Guys,

 

Just introducing myself and giving you guys some background on how I came to this forum.

 

I've been in the IT Industry since 1992. Unfortunately, IT positions are rapidly being outsourced to places like India and Malaysia, and this will only increase exponentially in the next few years. 

 

My last position was made redundant after being employed by them for many years.  Even though I received high merits on my monthly reports; there simply was no positions being retained ... it all went overseas to Malaysia.  Because of my skills, I was one of the last people to be made redundant, and having to train foreign workers to replace my friends at work, and eventually myself, not only left a bad taste in my mouth, but was also a huge wake-up call that IT Tech Support is finished in my country.

 

So, I am dedicating myself to learn about watch repair in the hope of being indentured as a apprentice: and retrain into a new career path with a future.

 

I know it is a hard occupation to get into (especially at my age), but I'm a hard worker and determined to succeed.  I want to learn as much as possible to have an edge over other being interviewed for the few positions being offered.  I would appreciate information on study material that you guys recommend ... books and apprentice training course material that I can purchase to further my own personal advancement,  until I get that job offer.

If you are located in the US there are a few excellent two year watch schools here. Seattle Washington, Norman, Ok, and Lancaster, Pa have schools. You may check in to schools.

Vich Distinguished Member

Vich

Posted
Posted

Hello Lawson and welcome. I was part of an in-house team for IT and Telecoms for 25 years but the job went bad when outsourcing started and the big names were tendering and eventually taking over all the mainframe administration. Then on site repairs ceased in favour of complete machine swap out. I decided to retire and have not looked back since. There is a lot of friendly help available here and heaven knows I have needed it. For me it is a hobby and I have restricted myself to two makes of watch but I would guess that you will not have that luxury. Good luck in your endeavours.

Vic

Sent from my iPad using Tapatalk

Tigertim Member

Tigertim

Posted
Posted

Hi Lawson Ilike you am a beginner at this, to start off i just bought some cheap movemets from ebay just to get used to where everything comes from and goes back to.It takes a long time to get it right but hopefully with practice I and you will conquer it. I have also bought 2 books Repairing old Clocks & Watches by Anthony J Whiten and the other one recommended by the guys on this site is Practical Watch Repairing by Donald de Carle. Good luck

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Mark
      Ad Free WRT

      By Mark · Posted

      Of course it will continue Richard.
    • Rixy
      Help with Hermle ships clock

      By Rixy · Posted

      I have stripped and cleaned a Hermle ships clock. It was just oily, no major faults, and I reassembled it, following my photos in reverse order. The time train is fine but the strike train will not play the ships bell strike for half-past. Ships bells play a four hour sequence for the 'watches' and play double 'ding' for the hour and the double dings plus one for the half past (eg half past the second hour is 'ding-ding' 'ding-ding' 'ding'). Sounds complicated but it isn't really. The strike wheel consists of pairs of bumps (for the ding-ding) and no single bumps. There must me some mechanism on the half-past that lifts the strike lever over one of the bumps so only one ding is played. When I get to a half past, it still plays double ding. I have a feeling it is to do with the lever in front of the rack (there is a sprung attachment  on it) and the position of the wheel (to the right) with the two pins that lets that lever fall, but no matter where I place that wheel I cannot get a single ding at half past! Please can someone help with advice on positioning so I can fix this? BTW Happy Easter 🐣 
    • mbwatch
      Who's doing what in the world of watches today.

      By mbwatch · Posted

      No it's not 52. I had looked at the Pocket Watch lift angles thread, which lists Elgin 6s as something really high like 62° but visually that is not at all what this watch is doing. I think 42° is more correct and that's where my machine is setup. The watch has a million problems but I have made solid progress. Impulse jewel replaced. Hairspring didn't match the balance (which also doesn't match the serial) but I got it down into range this weekend with 8 or 10 huge timing washers. Replaced the mainspring, balance and train are nice and free. At this point it is running consistently and in beat at about 160°, the third wheel has a bend that sends the timegrapher on a little roller coaster every 8 minutes or so. Remaining amplitude problems may be down to the escapement. The banking pins were way out and it didn't run at all before I started. It has one of the old brass escape wheels rather than steel, and I assume the faces its teeth are probably worn or scored in a way I can't yet fix (or see without a microscope). I know this watch is not going to run above 250° but I am going to keep trying to get above 200. But the best part about this watch? Some unscrupulous person stamped "21 JEWELS" on the train bridge sometime in the past, right on top of the Damascening. It's a 15 jewel movement.
    • tomh207
      Smiths rim wind and set

      By tomh207 · Posted

      I think it would rather be the blast of high current drain that would do the damage. But if used occasionally to maybe fix a mainspring or do dial feet it might be worth trying especially if the mainspring or a replacement couldn’t be found.    Tom
    • RichardHarris123
      Ad Free WRT

      By RichardHarris123 · Posted

      This is indeed a unique site and members including myself genuinely care about it.  All we want is the site to continue. 
×
×
  • Create New...