Jump to content

Recommended Posts

Posted

Just my luck but my work watch's battery ran out at work! It is so inconvenient for me to look up the time in my cell that I'm seriously thinking that automatics are better suited for everyday use.  Am I the only one who finds inconvenient to check time in a cell? Are watches nowadays only jewelry? Any thoughts on this? ,,,What watch do you prefer to use at work? 

 

post-253-0-28839300-1404526054_thumb.jpg

Posted

I'm with you on this one, I hate having to use my phone to check the time. It's a watch for me all the time as long as it has hands!

Posted

I'm glad Geo left his post as I thought you were in prison. (:-))

Sent from my iPad using Tapatalk

Posted

I'm glad Geo left his post as I thought you were in prison. (:-))

Sent from my iPad using Tapatalk

Next best thing...........kitchen renovation!

Posted

Absolutely, hads are important! :thumbsu: On the other hand (pardon the pun), how is that kitchen going Leo? I haven't forgotten about that chronometer. Parts are simply very scarce! I'll keep looking.

Posted

I haven't forgotten about that chronometer. Parts are simply very scarce! I'll keep looking.

Good man Bob, it would be great if you did manage to find some.

The kitchen is about half way there, it should be at least functional tomorrow. The weather was so good today in Dundee that I took a day off to enjoy it, not something you would have to do in gaitor country!

Posted

During my working life I once wore a Seiko 5 for about 8 years in conditions of shock and awe that would frighten most watches to death.  The Seiko eventually stopped due to a train pivot hole elongating, it was the only one not jewelled,  moral is,  buy at least a 17 jewel or better movement.

 

I also have a quartz with a 10 year battery life,  this is getting close to the ultimate watch,  if they could get it up to 100 years life,  then one watch is all we would ever need.

 

It's all a matter of choice,  something like a Rolex is virtually indestructible and will probably outlive it's owner if serviced now and again.  The only thing a Rolex is afraid of is fire and lots of it. 

Posted

 if they could get it up to 100 years life,  then one watch is all we would ever need.

God forbid, Will would have to kill himself! :-)

Posted (edited)

Gator and Shark country! It is a hot summer here and usually hot winter, spring and fall,,, oh no, Florida has no seasons, what am I talking about! In any case, when it is not raining or there isn't a hurricane in the neighborhood we usually have excellent weather (what is left!). Then, if you want to enjoy the beach you have to beware of sharks and if you chose the "country", read swamp, then it is the alligators... Well, we still have margaritas, night clubs and watches! ...more than one, (of either) by the way :)

 

What is certain is that from now on I'll be wearing an automatic. I use my watch a lot at work since it is more practical for me to just look at my wrist instead of digging in my pocket for the cell when I carry it on me (I'm not much of a text person either). Considering how awkward it is to carry a cell in your front pocket if you don't wear baggy pants, I've broken more than one cell screen by seating on them, so it is either a belt pouch or the backpack for the cell which puts the device effectively out of immediate reach. Because quartz is accurate and cheap if I damage it it is no big deal. But this one left me flat in the middle of the day! Less than 6 months new from the store and already out of juice! And the battery it takes is the size of a quarter! (CR2016). The worth part is that it seemed to be working fine, seconds hand moving and all, but the watch was slow like 10 minutes every hour! I'm starting to think that Timex is the new Ford... (Fix Or Repair Daily!) Pardon me, Ford lovers! (I've owned one or two in my time too).

 

To make a story short, the watch was rushed to surgeon Bob a.k.a. myself. The open heart operation lasted about 15 minutes: Cut open (bergeon case knife), extract movement, cleaned inside of the case ( Windex, soap and water, whatever), rodico on dial, new battery of course, wristband detailing (no polishing, doesn't deserve it for quitting on me) and Seiko silicon sealant in crown gasket and back for a better water resist deal. My two daughters were quite good assistants supplying air to the patient (bergeon hand pump) and the suture (cheapo case press) for the procedure outlined! They'll still make good watch doctors one day. The watch is happily ticking away and keeping time with accuracy again. Next appointment in 6 months!

Edited by bobm12
  • Like 1
Posted

I think the cell phone will be the death of digital wristwatches ... and not of the mechanical watch.  Is it just me, and I could be wrong here, but didn't the mechanical wristwatch resurgence really taken off since the advent of "smartphones"?

 

Bob, you asked if watches are only jewelry these days.  Personally, I think it goes deeper than that.  Today, in the cheap quartz age, people are inundated with "time".  There's a clock on your phone, on the stove, on the computer, in your car, on the Stereo/DVD player ... time is EVERYWHERE!!  But it's impersonal, soulless time.  A mechanical watch is different physiologically: it beats like a heart, is complex, with many microscopic parts ... just like us: they have a soul.  They are also a link back to when the displaying of time was less in your face; and more subtlety on your wrist: a time when we weren't ruled by time ... and people are gravitating back to them for many of these reasons.  Hence the value of vintage pieces becoming more desirable.

 

Also, chatting to friends and workmates, I've noticed that a lot of people are getting sick and tried of our throw-away society, where nothing is valued; or of value, anymore.  Where everything has designed obsolescence: purposely made to fail, and engineered not to be repaired or serviced.  This is not the case with a good quality mechanical watch; as they are purposely designed, with minimal maintenance, to last several lifetimes.  And that has great meaning to people these days.

 

A mechanical watch is jewelry, art, a status symbol, and a wonder of movement and engineering that you can wear on wrist: and like my old Flightmaster that I've worn for 16 years, they become a part of you that will be passed on to the next generation.

 

... steps off the soapbox :fpc:

  • Like 2
Posted

If you look at other watch forums, you'll find an enormous number of people out there who feel about their digital/quartz watches like we do about our mechanical watches. They're probably less concerned with the movements than they are with the faces, dials, bezels, cases, etc., but they're certainly out there! Whether even the smart phone will dislodge them from that fondness for quartz I'm not sure.

Posted

you'll find an enormous number of people out there who feel about their digital/quartz watches like we do about our mechanical watches.

Good point Will, I have a few quartz watches that I cherish.

Posted

To my mind there is no competition between Quartz and a quality mechanical.  Quartz gives us the most accurate watches we have ever had,  but they are completely soulless and today are a throwaway item.  On the other hand no-one is going to throw away a very valuable high quality mechanical wristwatch which looked after can be handed down, generation after generation.

I rest my case.  

Posted

Just thought I would add my thoughts. I have to say the combination of electronic and mechanical in the Accutron 214 and 218 elevates them to a different category whereby the skill needed to phase them due to an index wheel 2.4 mm wide with 320 teeth 0.01mm high, is quite testing. With the Spaceview you throw out the dial so the works can be visible. So as usual I seem to be straddling the fence again.

I went into a jewellers in LA where I was advised that if an Accutron came in with a solid gold case it was most likely it would be scrapped for the gold.

My Ancestors were making silver watches in the Georgian period and before but sad to say even the silver in the watch cases is now regarded to some Philistines as worth more than the skilful hand produced parts making up the movements so I appreciate where Lawson is coming from.

In conclusion I suppose I am saying that I am happy to be in the company of people with varying opinions but all of whom have an appreciation for the tastes of others and who honour the skill and hard work of past and current watchmakers no matter what type of watch.

My son wants me to sort out a mechanical Bulova self winder for him, got a working movement a while ago to play with, he does not wear a watch at present and tends to use his phone. Hopefully a convert.

Back to the Uk in 2 days.

Sent from my iPad using Tapatalk

  • Like 1
Posted

I'm glad you made the case for these humming marvels Vic, they deserve to be preserved!

By the way, are you back in Geordie land yet?

Posted

It is interesting, I never thought (originally) that those movements sold without cases came from stripped out watches (for gold, silver, etc). I could not even think a person would commit such an act! I hope that with time and knowledge that practice will stop.

Posted

It is interesting, I never thought (originally) that those movements sold without cases came from stripped out watches (for gold, silver, etc). I could not even think a person would commit such an act! I hope that with time and knowledge that practice will stop.

Unfortunately, as long as the price of gold and silver - particularly gold - is what it is, we won't see the end of the gutting of watches. The only consolation - if you can call it one - is that, for those of us who can't afford a gold watch, we can at least buy a decent movement for a reasonable price. That's why I was lucky to get my Longines movement recently - probably came from a gold case.

 

Perhaps we should set up in business as casemakers... and remake those lovely watches...

Posted

Back in Geordieland but after being up and travelling for 33+ hours I am knackered.  Bought far too much over there but got it all back unscathed including the boxed Accutron 700 tester. Bought loads of parts in radio shack to make a variable  power supply to use in tandem with the tester - hope my brain still works.Also bought an old but mint copy of Practical Watch Repairing for $6.75 dollars (£4.22) so I will now sit in the chair and read it (code for snooze).

Posted

Specialist I would doubt.  I have been referred to as an artist before but it was a completely different sort of conversation and there was a prefix to artist.  3 more posts and you join Will in the hall of fame.  Never did get that snooze - 30 days away and I came back to 792 e-mails. my finger is sore through hitting the delete button

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • By the way, I opened my watch, looked under a magnifying glass, there is simply no grease, the screws are without traces, the slots are intact.I think it's just a matter of maintenance.there are no rotor marks on the body. And to remove the strap from yours, just press on the 1st side,and slightly move the strap, then on the other side and it will come off.
    • Hi My name is Chris. Just started trying to learn about watch and clock repair as a result of repairing my fathers old 1890s police station clock (about a year ago). The clock was Ok, but having graduated to pocket watches and then wrist watches, despite the really excellent stuff on Youtube, I am struggling a bit.  As a retired engineer, I find the engineering exquisite, but a bit on the fiddly side.  I have done a few practice watches with a little success but failed a few, but have had success with Seiko 7005s, 7009s etc, but have just attempted a citizen 5430.  Nightmare.  My wife thought I had found religion as I spent so much time on my knees with my eyes to the floor looking for springs.  Got through that and found that the balance is shot.  Trying to source one or something that will fit from the citizen range has me totally perplexed.  Tried Ebay, Cousins etc without luck.  Any advice as to alternatives that will fit or alternative sources would be gratefully received.
    • Agreed, this is puzzling. Can you ask questions or inspect the lots before bidding? My Boley & Leinen Reform face plate is dia. 95mm exactly. It's possible that 4 inches is a slightly too large approximation, but why then make the distinction to 3 11/16 for the sake of 8mm? If the larger ones are truly 4" then they will clash with the bed, but then I have no idea which 8mm lathe would take them. All 8mm lathes have spindle height 50mm or less, as far as I know. The spindle height is, as you say, standard 50mm for W.W.
    • I have only been a member for six years & I have found this a very friendly forum although I don’t have anything to do with watches not because I don’t like watches but because I have gout in both hands so my dexterity isn’t very good, I restore torsion clocks & occasionally other antique clocks also at 72 my eyes are not what they used to be, that is why I only post on the clock forum & the lathe forum mostly . As others have said Mark it is much appreciated that  you are willing & able to do this. very many Thanks Dell
    • Ah, this is brilliant, thank you very much!
×
×
  • Create New...