Jump to content

Different way of cleaning a clock !!!!

clockboy

By clockboy
in All Things Clocks

 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

I was surfing youtube this morning and found this vid on a Gustav Becker clock being disassembled & cleaned !!!!!!

Your comments please on this guys method of cleaning. A new on on me for sure.

 

 

frenchie Distinguished Member

frenchie

Posted
Posted

Interesting for sure. I've cleaned metal parts by boiling them before, with dishwasher soap in the water, usually when there is a tough residue (paint, glue...) that needs to be removed. It's very effective and is a great way of cleaning parts with lots of nooks and crevices. 

That being said, I would be weary of using it for clock or watch parts... I'd be afraid that the heat could affect the parts in some way, especially if different metals are involved (different expansion/contraction rates).

But if it works for this guy, and he has waaaaay more experience than I do, then it must be perfectly fine!

Geo Distinguished Member

Geo

Posted
Posted

Thanks Frenchie, I got bored and started flicking through the video, it was so brief that I missed it.  

Clock stock; anyone for soup?

clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

I won,t be trying it thats for sure. Fumes, distortion of parts come to mind & also how was the barrel & spring cleaned ?. Also it does not look that clean when finished. 

Tmuir Distinguished Member

Tmuir

Posted
Posted
35 minutes ago, clockboy said:

Also it does not look that clean when finished. 

That's what I was thinking.

Even before I got my US cleaner and just soaked parts in my clock cleaning solution they came out cleaner than that.

oldhippy Distinguished Member

oldhippy

Posted
Posted

What a nightmare of a video. He broke nearly every rule in the book on taking a clock apart.:mad:

After removing the hands and dial, the first thing is let down all the power in the springs. He decided to remove the pallet cock and pallets first, so why didn’t the train wiz round? Very strange, unless it was the editing in the video, never the less it shows what he did and it is wrong. Removing the pins with not a care in the world (I nearly had a heart attack) great care should be taken and each part removed should be inspected for any wear. Never try to undo nuts with nippers they mark the nuts, use smooth jaw pliers or better still use the correct box spanner, which is what I would use. God knows what marks he made while trying to remove the hammer wire and the attachment, the wrestling he had was manly off camera. We could all see he did nothing with the two barrels, never looked at any of the wheels, pivots never checked for wear. The boiling of the parts, what the hell was he thinking of, there are many types of clock cleaning fluids these days with a good cleaning all parts will come up looking like new, his still looked dirty and it was a bloody eye sore. He should be kept away from any type of clock; the man is a bad advert for the trade. :pulling-hair-out::pulling-hair-out::pulling-hair-out:

 

Clockboy please don’t frighten me with any more like this. :D

oldhippy Distinguished Member

oldhippy

Posted
Posted
4 minutes ago, clockboy said:

Sorry.  just shows not every vid on YouTube is showing rhe correct methods

There's some real screamers on their of idiots changing batteries using there fingers and metal tweezers. A sure sign they won't last long.  

SSTEEL Distinguished Member

SSTEEL

Posted
Posted
17 hours ago, Geo said:

Thanks Frenchie, I got bored and started flicking through the video, it was so brief that I missed it.  

Clock stock; anyone for soup?

As long as there's noodles *cough* main spring :P 

oldhippy Distinguished Member

oldhippy

Posted
Posted
9 minutes ago, Geo said:

Why bother?

Because I care about horology and his disgusting practices, people like him gives the wrong impression to those who make an honest living and to those who enjoy clock repairing as a hobby.     

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mbwatch
      Automatic vs Manual movement servicing

      By mbwatch · Posted

      If at all possible, find a service guide for the automatic movements your work on, because the lubrication procedures may have different requirements or rely on oils you would not use in a manual wind train (in addition to the braking grease you mentioned). Some autos like older Seikos do not have a manual wind option, so the procedure of letting down the mainspring without being able to use the crown may require a screwdriver in the ratchet wheel screw and great care. Do you have an auto movement you were planning to start with?
    • LittleWatchShop
      Breitling Navitimer 806

      By LittleWatchShop · Posted

      I am an amateur, so there's that. I do not get fixated on amplitude, lift angles, and beat error. However, 4.8ms would bug me if it were my watch. But you must judge your own skills to appreciate the possibility of going backward. I suggest, that you button it up let your friend enjoy the watch for now. As your skills progress, come back to it and correct it. I assume that this watch has a fixed hairspring pin. Some modern watches have an adjustable pin along with adjustable regulator. These are trivial to get in beat. I own a valjoux 726 my dad gave me on my 18th birthday (a looooong time ago). I broke the ratchet wheel with an aggressive wind 4 yrs ago. I have been waiting for my skills to progress before doing a service. I am close. Your advice is well placed and I will apply it.
    • tonydagee
      Unitas 6376

      By tonydagee · Posted

      I didn’t find any anomaly to the left of the red mark…reflection? this is the balance in its pivot in the inverted assembly. i can’t see any obvious kinks  and the spring is flat as far as I can see. Either the stud screw is missing, or it’s glued in… I don’t know. I’m loathe to fiddle with it. Any further insights? Thanks!
    • Bonefixer
      Breitling Navitimer 806

      By Bonefixer · Posted

      Update!  I've dismantled it, cleaned all the glue off, and rebuilt and lubricated the base movement. I'll leave the chrono part for another day. It's running well - great amplitude and keeping time, but it's got a beat error of 4.8ms.    How important is it to correct this? I'm worried that the potential for making things worse having to take the hairspring off and on repeatedly to adjust this. Would anyone here accept it at that?
    • Neverenoughwatches
      Discussing the forum in the event of no administration

      By Neverenoughwatches · Posted

      Since I've been banned from the previous discussion, apparently my language was inappropriate...for small boys. I will start another thread and act in a more decent manner for the girls and ladies of the group.  Please what will happen if the forum can't be managed by the administrator, are there provisions in place to preserve the achived member's questions and answers over the years. Please if I may ask these important questions that are important to the members please.
×
×
  • Create New...