Jump to content

Recommended Posts

Posted

I am probably wrong but the first one. They both have mercury pendulums but the second one looks like a standard french movement & dial looks like it is off a 400 day clock.

Posted

Id go for the second of the two good quality french movement in a interesting case, the Angelus is a modern clock produced I would say sometime in the last 30 years and although Angelus being regarded as a good maker it lack's the quality of the second of the two it is definetley not a antique clock.

Posted

2nd one because it's cheaper :)  Neither are very old I suspect (they both say "made in"... which to me in a hint). I wouldn't buy either of those.

The first one looks modern, no natural corrosion anywhere.

The second one has 2 different styles of hands, some clearly replaced parts, looks a bit older..,

Posted

the Angelus looks like a fairly modern reproduction no discoloration of the enamel dial also the brass shows no sign of tarnishing.The second clock shows lots of age discoloration and the hands on the dial are not a matching pair. But ideally, you need to look in person to see the movement to know for sure.

Posted

It would be the second one for me, battle scars and all.  Whether the parts are correct for the case I don't know, but to me it is an old movement, pinned together and has a look of elderly quality.  A bit like yourself OH! :)

PS The pendulum has 3606 lightly scribed onto it which appears to match the number on the movement.  This probably indicates it's original to the clock.

Posted

The correct name for these original clocks is French Four Glass Clocks. Most come with a mercury compensated pendulum this means the effect of the weather will not affect the time keeping. Many have visible escapements. They come in various cases from very plain to extremely decretive and can be quite valuable. Most movements are striking on a gong or bell, although I have come across Timepieces.  I have included a photo of a nice decretive one so you can see what I mean. They would have been made from around the 1860 to about 1913 certainly not in or after WW1. Correct about the pendulum it should have the same number as the movement.

 

 

The Angelus is a modern clock and it has a bim bam movement or ting tang, two bells and two hammers and has little resemblance to the original apart from the shape of the case, it even has those terrible clips to hold parts on such as the clip holding the bell in place.

It would be the second one for me no hesitation at all.

Thanks to all for taking part.

cd6866ea8b2da7680e5f94419a5d936a.jpg

Posted

Late in replying, but I'm please to say I would of gone with the second one too, the screw on hands, nasty C clip and the general 'not old' look of the first one put me off, not to mention its hard to say, but it does look like it has cracks in the glass on the pendulum.

Posted

I got it wrong I am was really surprised that the movement with a mercury pendulum has such a basic movement.
Thats why I am a amateur I suppose. B)

Posted
43 minutes ago, clockboy said:

I got it wrong I am was really surprised that the movement with a mercury pendulum has such a basic movement.
Thats why I am a amateur I suppose. B)

They are extremely good movements made with very hard brass and steel. 

Posted
12 minutes ago, clockboy said:

Agree I have serviced / repaired many of these movements and they are really well made.  I just was expecting something better/unique. 

I'll see what I can do the next. I'm always looking for something different but not to difficult to keep the clock section interesting.

  • Like 1
Posted
On ‎27‎/‎03‎/‎2017 at 8:05 PM, oldhippy said:

I'll see what I can do the next. I'm always looking for something different but not to difficult to keep the clock section interesting.

I do enjoy your clock quiz's  oldhippy.  :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • If at all possible, find a service guide for the automatic movements your work on, because the lubrication procedures may have different requirements or rely on oils you would not use in a manual wind train (in addition to the braking grease you mentioned). Some autos like older Seikos do not have a manual wind option, so the procedure of letting down the mainspring without being able to use the crown may require a screwdriver in the ratchet wheel screw and great care. Do you have an auto movement you were planning to start with?
    • I am an amateur, so there's that. I do not get fixated on amplitude, lift angles, and beat error. However, 4.8ms would bug me if it were my watch. But you must judge your own skills to appreciate the possibility of going backward. I suggest, that you button it up let your friend enjoy the watch for now. As your skills progress, come back to it and correct it. I assume that this watch has a fixed hairspring pin. Some modern watches have an adjustable pin along with adjustable regulator. These are trivial to get in beat. I own a valjoux 726 my dad gave me on my 18th birthday (a looooong time ago). I broke the ratchet wheel with an aggressive wind 4 yrs ago. I have been waiting for my skills to progress before doing a service. I am close. Your advice is well placed and I will apply it.
    • I didn’t find any anomaly to the left of the red mark…reflection? this is the balance in its pivot in the inverted assembly. i can’t see any obvious kinks  and the spring is flat as far as I can see. Either the stud screw is missing, or it’s glued in… I don’t know. I’m loathe to fiddle with it. Any further insights? Thanks!
    • Update!  I've dismantled it, cleaned all the glue off, and rebuilt and lubricated the base movement. I'll leave the chrono part for another day. It's running well - great amplitude and keeping time, but it's got a beat error of 4.8ms.    How important is it to correct this? I'm worried that the potential for making things worse having to take the hairspring off and on repeatedly to adjust this. Would anyone here accept it at that?
    • Since I've been banned from the previous discussion, apparently my language was inappropriate...for small boys. I will start another thread and act in a more decent manner for the girls and ladies of the group.  Please what will happen if the forum can't be managed by the administrator, are there provisions in place to preserve the achived member's questions and answers over the years. Please if I may ask these important questions that are important to the members please.
×
×
  • Create New...