Jump to content

Recommended Posts

Posted (edited)

My son bought me a copy of George D's autobiography for my birthday - "All In Good Time". Fascinating stuff - from poverty in the East End to fame and fortune as the world's greatest horologist. We're off to Alnwick today, via Buxton - so it'll be a good read on those rainy days.

 

The problem, as always, is "what watch(es) to take?"...

 

The Bulova is the bog standard, time master. The Girard-Perregaux for evening wear in those Northumberland tapas bars. And I'll probably take the Hamilton Khaki as an all-purpose weather watch.

 

I'd planned to take my 1939 Unitas, which I love, but the little bugger decided to break its mainspring over the weekend. Luckily, they're available from Cousins, so it's a job for when I get back...

Edited by WillFly
Posted

George Daniels was a fascinating character and a master watchmaker, probably the equal of any who lived before him. R.I.P.

 

As to your watch problem, it seems to arise from overabundance, if you only had a couple picking one would be a lot less trouble.  I think most would agree that you have a very bad case of watchitis and have passed beyond,  way beyond,  the stage where tablets or therapy would be of any help.  On the upside it probably saves you from worse things than collecting watches.  :thumbsu:

 

Enjoy your break.

  • Like 1
Posted

"All in good time" is an excellent book. I read it about two years ago and was total engrossed with it. It beats me how he had the time to do some of the other things he was into. The man was a genius!

Posted

Tell you what Will, send a couple of the doubtful wears my way and I'll wear them for you. That'll make your decision easy! Enjoy your trip!

Posted
autowind, on 02 Sept 2014 - 5:56 PM, said:

As to your watch problem, it seems to arise from overabundance, if you only had a couple picking one would be a lot less trouble.  I think most would agree that you have a very bad case of watchitis and have passed beyond,  way beyond,  the stage where tablets or therapy would be of any help.  

 

Look, we are all friends here, and I for one want to help poor Will with this much needed therapy.

 

To start with, we need to simplify your life with less watches ... so please PM me to arrange shipment of your complete collection; bar perhaps 1 or 2 basic beaters, to aid in your "mental health and well being".  You know it's for your own good Will, and because I care.

 

Once they arrive here, we'll discuss further treatment .... :nurse:

Posted

It's a lost cause, chums. I've got the addresses of two large antiques centres in the area, and my debit card is champing at the bit... :money:

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Aw come on Andy, it was just a comparison between spending 30 quid and tackling a tricky piece of work. You appeared to be volunteering,  i volunteer for stuff all the time it gets me into all kinds of trouble.
    • It's not really shown here , but the blade flips over, so it faces the other way. The knob and threaded case holder then pushes the caseback seam into the blade. Once the blade starts to penetrate into it, the lever and blade are lifted , which should hopefully pop the back off. A lot of fashion style cases have very tight seams and need a sharp blade to start separating them.  Don't buy the cheaper plastic versions of this tool, the posts with the pins through for blade holder break easily if the apply extra force to blade. 
    • You will still be looking for a balance complete I’m afraid, this is the balance staff, balance wheel and hairspring in one package. Hairspring and the balance wheel are matched in the factory. Whilst we can change a balance staff the hairspring and balance wheel stay together.   Tom
    • The hairspring end has come adrift from the small terminal barrel.  I have tried to remove the taper pin to relocate it, but the task is beyond my skill set, eyes, hands and being in my 70s, probably beyond my life expectancy.  It is not too badly mangled on the end.  On the ebay offer, that really is a bit on the rich side.  I'll keep looking, maybe a good hairspring will turn up with a shot balance staff. As for time spent on knees.  I made up one of these from 3M magnetic tape and a piece of wood.  It works well for magnetic parts. Other things I have suffered with.  I found lubricants so very expensive that I bought some very small syringes and tiny needles.  I just decant a drop into my oiling pots when I start a movement and the remainder keeps really well in the syringes. Finally identifying the correct screw for the part led me to make up the board in the final pic.   Thanks for the info. Kind regards   Chris  
    • Yes that's the type @watchweasol is referring too but I don't like them as you don't get any feel to what's happening.
×
×
  • Create New...