Jump to content

Hello and advice?

Willspring

By Willspring
in Introduce Yourself Here

 Share

Recommended Posts

Willspring New Member

Willspring

Posted
Posted

Hello!

wanted to ask a bit of advice that I’m sure you get a lot. I’m very close to signing up and buying the BHI’s DLC. I’ve been doing a lot of poking about online and seem to be seeing a lot of mixed responses about it. I’m not particularly looking for a career change (I’m an illustrator by the way) but am looking for a way to learn as much as I realistically can, theoretical and practical, without requiring full time study. My main concerns with the course is the seemingly vast amount of frequently very expensive equipment needed. I did anticipate that to a degree but there is also the matter of space and storage to consider.

So, to make a long story longer, does anyone have any fairly up to date experience of the course? Are the tutors good? What do you actually physically get for your significant outlay? And really, is it actually any good?

i appreciate all this is a bit vague and I’m asking a lot, but for me it’s significant decision requiring significant money and commitment,so I’m trying to get as much info ahead of time as possible.

anyway,sorry for rambling a bit and if anyone can help, then many thanks!  

ecodec WRT Addict

ecodec

Posted
Posted

Hi Willspring, I feel sure that the courses you mention will be very thorough with excellent tutors. I have never done any course on watch repair (ex electronic engineer retired) however I did receive several years part time in depth theoretical and practical training from a master watchmaker dear friend many years ago. He was Geneva trained and alas, has now departed. I am what one would call a Jobber or watch fixer academically unqualified.  You will need a few decent quality tools the basics are  screwdrivers, three pairs of tweezers, one pair brass and a plastic non conductive pair to replace  watch batteries, 2 eyeglasses one 4X and one 10X,  Case opening tools, de Carles Practical Watch Repairing book is a good choice and a Timegrapher. I have the 1900. Then a lot of practice. Before you buy anything check the course requirements. Mark Lovick is very skilled and does repair courses as well on U Tube. Check him out. This is just an unqualified opinion so I hope I have not led you astray. There is a world of difference between a Jobber Fixer like me and a watchmaker and there are many very skilled people on this forum. Best regards and good wishes, Mike.

Willspring New Member

Willspring

Posted
  • Author
Posted

Hi, thanks for the reply. Do appreciate it. Very interesting read as well. I think with the BHI training it all sounds great until it’s starts causally mentioning lathes and what have you. I would of course love to learn to machine parts etc but it’s concerns of space and cost really on that one. I kind of have a feeling that you go merrily into a course like this and then find you need a huge slush fund and a separate workshop.

the tools list you mention is invaluable I think and will make a careful note of all you mention. As I will the chap on you tube.

the ideal really is to have a local chap to observe and absorb from but they’re few and far between around here it seems (Sussex coast) 

Anyway...you certainly haven’t put me off, and again, really appreciate the trouble in replying.

cheers mike.

will.

ecodec WRT Addict

ecodec

Posted
Posted

Willspring. Good luck with the study Mike. I have some home made tools as well but no lathe etc, I do repair  jobs to most watches  and I try to obtain like  spares and sometimes have to modify them  with a minimum of tooling.  I can do a lot with a small pillar drill, a very small chuck and  a steady and many selected fine files etc and seem to get mainly higher end vintage watches and modern quartz,  of course. There is not much help out there except this fine forum who have helped me a great deal recently re a Rolex calibre. All my thanks to all concerned.  I know that I am not too well liked by some people in the trade locally because they feel that I am taking their work away. In general  some  quote  such high repair fees that a lot of people just throw the watch in the drawer for the next thirty years. You will no doubt want to go further than me so I feel sure that you will benefit from a good watchmakers course. I hope that I have not bored you too much but this is a view of what I do nowadays to keep busy so to speak. I feel sure that a younger person would be more professional after training. All good wishes, Ciao, Mike.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Rixy
      Help with Hermle ships clock

      By Rixy · Posted

      I have stripped and cleaned a Hermle ships clock. It was just oily, no major faults, and I reassembled it, following my photos in reverse order. The time train is fine but the strike train will not play the ships bell strike for half-past. Ships bells play a four hour sequence for the 'watches' and play double 'ding' for the hour and the double dings plus one for the half past (eg half past the second hour is 'ding-ding' 'ding-ding' 'ding'). Sounds complicated but it isn't really. The strike wheel consists of pairs of bumps (for the ding-ding) and no single bumps. There must me some mechanism on the half-past that lifts the strike lever over one of the bumps so only one ding is played. When I get to a half past, it still plays double ding. I have a feeling it is to do with the lever in front of the rack (there is a sprung attachment  on it) and the position of the wheel (to the right) with the two pins that lets that lever fall, but no matter where I place that wheel I cannot get a single ding at half past! Please can someone help with advice on positioning so I can fix this? BTW Happy Easter 🐣 
    • mbwatch
      Who's doing what in the world of watches today.

      By mbwatch · Posted

      No it's not 52. I had looked at the Pocket Watch lift angles thread, which lists Elgin 6s as something really high like 62° but visually that is not at all what this watch is doing. I think 42° is more correct and that's where my machine is setup. The watch has a million problems but I have made solid progress. Impulse jewel replaced. Hairspring didn't match the balance (which also doesn't match the serial) but I got it down into range this weekend with 8 or 10 huge timing washers. Replaced the mainspring, balance and train are nice and free. At this point it is running consistently and in beat at about 160°, the third wheel has a bend that sends the timegrapher on a little roller coaster every 8 minutes or so. Remaining amplitude problems may be down to the escapement. The banking pins were way out and it didn't run at all before I started. It has one of the old brass escape wheels rather than steel, and I assume the faces its teeth are probably worn or scored in a way I can't yet fix (or see without a microscope). I know this watch is not going to run above 250° but I am going to keep trying to get above 200. But the best part about this watch? Some unscrupulous person stamped "21 JEWELS" on the train bridge sometime in the past, right on top of the Damascening. It's a 15 jewel movement.
    • tomh207
      Smiths rim wind and set

      By tomh207 · Posted

      I think it would rather be the blast of high current drain that would do the damage. But if used occasionally to maybe fix a mainspring or do dial feet it might be worth trying especially if the mainspring or a replacement couldn’t be found.    Tom
    • RichardHarris123
      Ad Free WRT

      By RichardHarris123 · Posted

      This is indeed a unique site and members including myself genuinely care about it.  All we want is the site to continue. 
    • watchweasol
      Ad Free WRT

      By watchweasol · Posted

      Hello Mark,  thank you for the ad removal , like JohnR725 , I appreciate any revenue from such would be helpful.  This is the one forum which encourages conversation and social interaction and in that sense it is unique  All the others I frequent can be a little intimidating and answers some what terse some quite rude. I think on here we try to do justice to your site in keeping with your principals. In my opinion it is like no other. The contributors  behave and act like gentlemen and ladies. And long may it continue to be so.
×
×
  • Create New...