Jump to content

Forester 222 stem release question

Pdx
 Share

Recommended Posts

Pdx Member

Pdx

Posted
Posted

Hello all. I found this in a jar of watches and would like to reattach the second hand, but I'm not sure how to release the stem.  Is it the little screw at the 12 o'clock position that is just to the left of the stem in the first photo?

 

oAaGBn7.jpg

 

4ZHqwEd.jpg

 

5I1VtHO.jpg

Pdx Member

Pdx

Posted
  • Author
Posted

Thanks.  I got it.  I got the second hand back on.  It doesn't work though.  It winds and the rotar oscillates, but something is still not allowing the balance wheel to turn.  Maybe the mainspring is shot as I can wind it endlessly. I have never taken a watch apart, so my knowledge is rather rudimentary and quite limited.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • coreymsnow
      Very Old Watch- "Echappement A Ancre", "13 Rubis" on the case

      By coreymsnow · Posted

      Hi friends! My mother got a bunch of old watches from a horologist who was retiring, and he subsequently passed away. It's been in her studio for years, and she showed it to me today and I just fell in love with it. Sadly, I don't know a darn thing about it yet. It's quite old, or at least seems to be. It has two winding arbors, but the key is missing. The crystal appears to be some kind of yellowed plastic, which is odd- I think it was replaced at some point to possibly protect it or something. If I had to guess, it's from the mid-19th century, given that it has no keyless works and that it says "Anchor Escapement" in French. It looks to be about 18 ligne, and the case fob is positioned in the upper right corner. The face is missing the dial, the hands, and a couple of the wheels that drive the hands- I think. But the movement itself seems to be in excellent shape. The serial number on the movement matches the number on the case- it's stamped on the movement and on the case in two places. I haven't started any disassembly yet, but I'm wondering if anyone can give me some idea of what kind of movement it is, and where I might look to see what parts are missing from the face. i may even have a dial that would fit it. It's in good enough shape that I think I could get it running, assuming I could find the missing parts. Any insights are vastly appreciated and thank you!
    • BobG
      Etachron regulation system

      By BobG · Posted

      I’ve watched every video I can find on YouTube. Some of the info is contradictory and none mention  the effect on amplitude or spring coil spacing which I observed. I was hoping someone here is a Seiko expert and knows these inside out.   
    • Mercurial
      Etachron regulation system

      By Mercurial · Posted

      This video explains how to set up and adjust the etachron regulator :   I hope that helps, Mark
    • Mercurial
      Phinney Walker Mickey Mouse Watch HELP

      By Mercurial · Posted

      This eBay listing seems to verify that the watch disassembles as I suggested : here. The display caseback is held by the section that pushes out of the outermost rear bezel.  The movement seems to be a Ronda 1113. Best Regards, Mark
    • zx6rfool
      Hi From Virginia

      By zx6rfool · Posted

      Decided to update with the repaired watch back in rotation and the new anniversary gift.   
×
×
  • Create New...