Movement for intro course...

[tmac1956]

All:

I apologize for posting this question in the forum but I've gotten no response from the actual course site.  So... what ATA movement does one need in order to start the intro watch repair course?

Thanks,

tmac

[JBerry]

Lesson one and two are centered around the ETA/Unitas 6498. You could pick up a cheap clone online to save some money, Mark has some videos about these clones on YouTube also. The knowledge is pretty much transferrable to most 17 jewel hand winding movements too, so you could get away with using others too

Sent from my Redmi 4X using Tapatalk

[tmac1956]

JBerry:

Would this one work?

https://www.ebay.com/itm/SKELETON-RATCHET-CROWN-WHEEL-SET-FIT-MOVEMENT-ETA-UNITAS-6497-6498/132357626200?hash=item1ed1211958

Thanks for your help!

Tom

[JBerry]

Your link is just for a set of train wheels to fit an ETA 6498 unfortunately. This is more like what you're after, probably can find it cheaper though, https://m.ebay.com/itm/Seagull-ST3620-TY3620-ST36-Clone-of-ETA-Unitas-6498-2/123287634709?epid=4008410969&hash=item1cb4840315:g:DtIAAOSwSI5bY1jF

Sent from my Redmi 4X using Tapatalk